the gross vehicle weight rating of a 1989 Chevrolet 2500 pickup is 8,600 lbs.
yup
timming just needs to be close the computer adjusts it to what it needs and the points are gone since the early 70's it is electronic with moduales, sensors and such
Clockwise when viewed from pulley end.
To remove the tailgate lock on a 1989 S-10 Blazer, first remove the cover over the inside of the tailgate by removing the bolts on the side and on the handle. Pop the vinyl away from the tailgate. Then remove the bolts holding the lock on and remove the lock.
this question should be under automible repair I'm having the same issue and from what I can find out the rotors cannot come off without pressing the entire assembly off the spindle.
it is located in the fuel tank
Go to your local dodge dealer and ask if you can get a copy.
You still have to remove the transmission on a van to access the rear freeze plugs.
you have to take off the hubs and you need crazy hard to find tools
The 1989 Dodge Dakota automatic shutdown relay switch is located in the fuse box. The fuse box can be found in the engine compartment.
The Dodge pickup trucks with Cummins engines are diesel turbocharger engines. They are built by the Cummins company and have been used in Dodge Ram trucks since 1989.
The firing order should be 1-6-5-4-3-2.
Type your answer here bolted to the rear main bearingcap.remove the oilpan and its there. good luck,ted
Bad lockup clutch in the torque converter possibly.
my truck wont drive it does everthing but when i otu in d it makes sound
On the drivers side of vehicle,underneath the bed, in front of the gas tank,mounted to the inside of the frame.