1. Remove the brake hose to caliper bolt from the brake caliper.
2. Remove the brake hose from the brake caliper.
3. Remove and discard the 2 copper brake hose gaskets. These gaskets may be stuck to the brake caliper and/or the brake hose end.
4. Cap or plug the opening in the brake caliper and the brake hose to prevent fluid loss and contamination.
5. Remove the 2 brake caliper pin bolts. Remove the park brake cable from the caliper.
6. Remove the brake caliper from the brake caliper bracket.
The 2006 Chevrolet Malibu has 37.6 in. of rear head room.
The 2006 Chevrolet Malibu has 56.1 in. of rear shoulder room.
The 2006 Chevrolet Malibu has 52.0 in. of rear hip room.
The 2006 Chevrolet Malibu has 38.5 in. of rear leg room.
The rear track of the 2006 Chevrolet Malibu is 4 ft. 11.3 in. (59.3 in.).
Remove the tire and wheel from your 2002 Chevy Malibu. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.
remove brake drum or caliper, remove caliper mounting bracket if nessesary. unplug electical connecter from wheel sensor on the back side of knuckle. remove 4 hub to knuckle bolts, remove the hub and bearing assembly!!
Front or rear? Front should have 2 17mm hex head bolts loosen them and remove them both and you should be able to remove the caliper. Rear calipers should have 2 14 or 15mm hex head bolts and just do the same
9mm hex key front and 7mm rear
in order to remove the rear caliper, you first remove the parking brake cable using a 14mm socket to remove the bolt. After removing the parking brake you can remove the caliper carrier, using a 17mm socket to remove the two caliper carrier bols this allows you to remove the caliper from the rear rotor, you can slide the caliper off of the carrier to remove it completely. to remove the rotor you can use a soft faced mallet and gently tap the inside of it and it should come right off.
Try a TORX T-40 or 45 Many second generation Expeditions (2003-2006) use a 9mm to remove the front caliper and a 7mm for the rear.
Two mounting bolts at rear of caliper - then slide caliper off rotor