Using a set of a/c gauges put the blue hose on the low side (suction side) and the red hose on the high side (discharge side) and make sure that there is no freon in the system and if you have freon in the system then you will have to go to an automotive a/c shop and have them reclaim it for you..
Put the yellow hose on your vacuum pump and let it run for about 1 hour and then let it sit for 1 hour so that you can see if it will at least hold the vacuum pulled.
If so then let it run for an additional hour and then start the recharging process remembering to keep the low side readings between 30 to 40psi and the high side between 200 to 250psi depending on the outside temperature…………….
The recharge prot is on top of the "drier", which is located under the passenger side wheel well. Will-
The recharge port is located on the passenger side near the firewall.
which is the air conditioner relay on a 99 ford ranger
Answering "Where do you add freon to your air conditioner in your ford ranger?"
With a can of freon
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?
where is the suction recharge value on a 200 ford focus
where are the fuseible links located on a 2000 ford ranger
bolt pattern for 2000 ford ranger & ft pounds
Bank 1 is the passenger side of a V6 engine in a 2000 Ford Ranger
5W-30 , according to the 2000 Ford Ranger Owner Guide
what type of radiator fluid does a 2000 ford ranger take?