The best method is to tape the parachute to the side of the bottle and stuff it inside of the nose cone. The nose cone should have string connecting it to the rocket, yet, the nose cone is not actually taped to the bottle. It should balance on: a) Tabs (Cardboard) b) Just have it firmly on top of the top of the bottle This way, the rocket will soar straight up (hopefully), the nose cone will detach (but stay connected), the parachute will fill up with air and expand, and your successful rocket will sink to the ground at about 2-6 mph.
Same as it is on a human, decelerate the descent speed such that the rocket can be used again.
To make a water rocket, you will need a plastic bottle, a bottle launcher or pump, water, and an air pump. Optionally, you can also use fins for stabilization and a parachute for a safe descent.
you get a two liter then you live one untouched the other you cut the tip off then make a parachute then contact it
The parachute of a rocket is used to slow down the rocket when it falls down.
take 2 l. bottle cut the bottom of a bottle off put the 2 bottles together take a piece of balsa wood and make the wings fill the bottom part of the water rocket with paper put the wings on the bottle rocket cut a circular cup in half put a tennis ball on the cup
Approximately 100-150 psi of compressed air is typically used to launch a bottle rocket effectively. It is important to follow safety guidelines and instructions provided with the bottle rocket kit to ensure a successful launch.
put a cherry bomb in it and time it.
The parachute creates drag that opposes the rocket's motion, slowing it down. This drag force is generated as the parachute catches the air and creates turbulence, reducing the rocket's speed.
Bottle Rocket was created in 1994.
get a 2 litre bottle put a cone on top get a lancher then pump it up and BLAST OFF!!!!!
square before you put it together
The duration of Bottle Rocket is 1.53 hours.