I used to work in an acrylic shop and we would use weldon, there are many types depending on consistency. We also used clamps and wppden blocks to hod the acrylic in place.
Chat with our AI personalities
Strip heater-to heat up the acrylic so that you can bend straight line edges into it Acrylic drill bits-so that it is easier to drill through the acrylic Square- to check that everything is lined up correctly and is straight Solvent cement-is used to join pieces of acrylic together
The seam allowance is needed to allow for extra fabric where separate pieces of fabric are joined together at seams. If seam allowances were not provided you wouldn't be able to join pieces together or your garment would end up being too small. If you look at the inside of a shirt, for example, you will see that the stitches take up fabric and that is what seam allowances are for.
make 4 squares and join them make 4 squares and join them make 4 squares and join them make 4 squares and join them make 4 squares and join them make 4 squares and join them make 4 squares and join them
You don't "join," you are asked.
google "church of satan" and call them^^