depends what year it is. i know that the 94 models you just loosens the bolts in back of the power steering pump and the belts should loosen.
It is the part that connects the engine to the trans and transmits the power. It is between there.
Use any fluid for use in power steering systems that is labeled Power Steering Fluid.1984-2001 Cherokee Owners Manuals and Factory Service Manuals both state in bold letters DO NOT USE ANY ATF IN THE POWER STEERING.
No such partNo such part
Purchase a Haynes manual from an auto parts store.
Loosen up the power steering pump and pull on pump till belt is tight.
How do you change a power steering pump in a 98 jeep cherokee?
The only differences are between a regular Cherokee and a Grand Cherokee.
under the hood by the steering box
With a special tool available at most parts stores. The tool prresses the pulley on.
found out 1997 to2001 will interchange but not all pumps will work check bolt patterns
loosen the power steering pump, slide it forward so you have some slop, then remove it and follow you diagram inside the eng compartment to rethread, retighten your you power steering pump, off you go
Secure the power steering pump with the retaining bolts. Attach the power steering hose to the power steering pump. Put the belt on to the power steering pump. Fill the power steering system with fluid.
Yes.It can be converted . You will need to install a power assisted steering rack, power steering pump, belts and hoses.
depends what year it is. i know that the 94 models you just loosens the bolts in back of the power steering pump and the belts should loosen.
The power steering pump is located on the front of the engine. The uppermost pump connected to the serpentine belt.
No such partNo such part