0
It can be a simple mechanical joining of the two shafts, so that when the turbine shaft rotates, the joined dynamo also rotates at the same speed.
It is more common to use a gearbox, so that a different rotation speed is imparted to the dynamo.
The ratio will depend on the ideal speed required by the dynamo and the available power from the turbine.
A relatively slow moving set of wind turbine blades, will have a lot of available power, so a gearbox that has a large gear turning a small one, will increase the speed, allowing the dynamo to produce the required voltage.
A water turbine may spin at a very fast speed, beyond the working parameters of the dynamo. In this case the gearbox will not only reduce the revs to the dynamo, but it will also be able to take a heavier load.
To connect a dynamo (generator) and a turbine, you would typically attach the turbine's shaft to the dynamo's input shaft. As the turbine spins due to a fluid (like water or steam) or wind, it rotates the dynamo's input shaft, generating electricity. Proper alignment and coupling are important for efficient power generation.
as the dynamo works when the main motors runs automatically another motors runs and due to friction iron rod inside motors get contracted with copper and zinc rod which is responsible for producing current
Add your answer:
Earn +20 pts
The dynamo theory states that earths magnetic field is created in layer as the?
The dynamo theory states that Earth's magnetic field is generated by the movement of molten iron in the outer core of the planet. The fluid motion of the molten iron creates electric currents, which in turn produce the magnetic field that surrounds Earth. This process operates similar to a self-sustaining dynamo, hence the name "dynamo theory."
What is the source for mechanical motion supplied to a generator called?
The source for mechanical motion supplied to a generator is called a prime mover. This prime mover can be in the form of a steam turbine, gas turbine, water turbine, wind turbine, or internal combustion engine, which converts mechanical energy into electrical energy through the generator.
The dynamo theory states that Earth's magnetic field is created in what layer?
The dynamo theory states that Earth's magnetic field is created in the outer core layer, where the flow of liquid iron generates electric currents through the movement of the molten metal. These electric currents create a magnetic field around the planet.
What layer of the earth produces dynamo effect?
The outer core layer of the Earth is responsible for generating the dynamo effect. The flow of molten iron in the outer core generates electrical currents, which in turn create the Earth's magnetic field through a self-sustaining process known as the geodynamo.
What kind of energy is made when steam comes out of the earth and spins a turbine?
Geothermal energy is produced when steam from beneath the Earth's surface is used to spin a turbine. This steam is generated by heat from the Earth's core, which is harnessed to produce electricity in geothermal power plants.
Why is there only one wire on a dynamo lamp in a wind turbine?
The single wire in a dynamo lamp is typically used to connect the lamp to the output of the dynamo, which generates electricity from the rotating movement of the wind turbine's blades. The lamp can be illuminated when electricity is produced by the dynamo, providing a source of light powered by the turbine's energy generation.
A device that converts mechical energy into electrical?
Turbine,dynamo
What is an amplydine?
A direct current dynamo with a major 'amplification'. Driven by a turbine.
Whats the function of a turbine and dynamo in a steam plant?
they convert mechanical energy into electricity.
How do you converting heat into electricity?
Use the heat to boil pressurized water. Use the pressurized steam created to spin a turbine connected to a dynamo. The dynamo then produces electricity.
How dynamo moving?
Any type of 'prime mover' can be used -e.g. petrol or diesel engine, turbine, etc.
On the dynamo Where does the energy to generate the electricity come from?
The energy comes from whatever turns the dynamo. This can be any form of mechanical energy, water power, wind, tidal forces, steam turbine, etc.
Can electricity be regenerated by connecting electric motor to a dynamo?
The question is mine......take one dynamo and a motor (both of them are DC).. If The Dynamo is 12v and the motor is 9v...and connect together.....means the rotating shaft of a motor is connecting using a belt then the other end connected to the rotating shaft of the dynamo ......connect the wire parallel......let start... take a cotton thread of 15 cm ...then round the thread on dynamo rotating shaft the pull it....the current from dynamo flows to motor that action make the motor rotates but not constant.....
Can a dynamo work by the heat of steam?
Yes, a dynamo can work using the heat of steam by driving a steam turbine, which then turns the dynamo to generate electricity. This process is commonly used in steam power plants to produce electricity on a large scale.
The two common names of a mechanical device used to convert mechanical energy to electrical?
dynamos | dynamo | generators | generator | turbines | turbine
How can one use windmills for electricity?
The use of wind power for electricity involves the attachment directly or indirectly of a magnet to the turbine to spin within a dynamo to generate a current.
Types of dynamo?
hub dynamo, bottle dynamo, bottom-bracket dynamo
