1998 Chevrolet Blazer did not have vent windows.
It is located in the fuel tank.
I have a 99 blazer with the same problem. If i move the light dimmer dial from side to side it will stop. You can change the switch or from time to time wiggle the switch.
To change the starter on a 1998 s10, the motor mount will have to be removed. Support the motor on a jack with a board on the top of it, and remove the mount to get to the starter.
Take a small screwdriver, gently pry the cover off. Slight downward pressure will remove the old bulb.
HOW TO GET A PULLEY OFF A 1998 CHEVY BLAZER
security light on 1998 s10 start but cut off
remove all the screws from the tail light asembly turn bulb to remove put electrical contact greas on new bulb install new bulb replace screws
Just unscrew it.
how do you change ash tray light bulb in a 1998 GMC Sierra 1500
Begin by removing the engine wiring harnesses. Remove the motor mount retaining bolts. Disconnect the engine from the transmission. Lift the engine out.
I need diagram for 1998 chevy blazer fuse panel