Before replacing the thermostat, it is worth checking to see if the blend door is broken or the blend door actuator is failing. The most common issue relating to thermostat and climate control in Ford Windstar vans is the blend door. CHECK TO SEE IF IT IS BROKEN BEFORE REPLACING OTHER COMPONENTS (i.e. Thermostat, heater core, etc.). The Blend Door actuator on the Ford Windstar can be found by removing the glovebox. A broken blend door actuator is almost as common as a broken blend door itself. Typically, the fix requires disassembling the entire dash and replacing the whole plenum box, which can be a costly repair. Linked here is a video from www.heatertreater.net demonstrating how to access components of the plenum box for repair without disassembling the entire dash.
First thing I think of here is the thermostat housing.If so, see "Related Questions" below for more details on replacing the thermostat
Please help me!!!!!
my 2001 ford windstar is still overheating even though i changed out the thermostat. what could it be?
where is air flow relay on 2000 ford windstar
where is the tcm in a windstar 2000 located
According to the 2000 Ford Windstar Owner Guide ( 5W-30 )
In the cargo area , on the passenger side , behind the service panel ( on a 2000 Ford Windstar )
According to the 2000 Ford Windstar Owner Guide : ( 26.0 U.S. gallons )
According to the 2000 Ford Windstar Owner Guide : ( 98.4 litres / 26.0 U.S. gallons )
how do you change a shaft soleniod in a ford windstar 1995 v6 3.8 engin
How many tons does a ford windstar van weigh
Replacing the thermostat in a 2000 Ford Focus SE wagon is very easy to do. First the radiator hose will need to be disconnected from the thermostat. After the hose is drained and disconnected, the thermostat can be removed by taking the two bolts off.