0
Type your answerto chemicals here... add water to chemicals
Answer:When in doubt add chemicals to water. It's particularly important to add acid to water. Adding a smaller amount of a neutral substance to a more concentrated amount of a reactive substance is more likely to create a violent reaction than the other way 'round. The larger volume of neutral substance is more likely to quell/subdue/dilute the reaction as the reactive substance is added to it.
Always remember to add acid to water, not water to acid. This is because adding water to acid can create a violent exothermic reaction, causing splattering and potential danger. Adding acid to water allows for gentle mixing and a safer process.
Its very important that you add the acid to the water.Otherwise the acid can splash you and get on your skin and also if it is a concentrated acid, as you dilute it, a lot of heat is generated, and you want the larger volume of water to be able to absorb that heat.
Add your answer:
Earn +20 pts
How do you dilute an acid?
To dilute an acid, you can slowly add the acid to water while stirring continuously. Always remember to add acid to water and not water to acid to prevent splattering. Aim for the desired concentration by adjusting the ratio of acid to water.
Large water add to small acid?
When adding water to acid, it is important to add the acid to the water slowly while stirring continuously. This helps to prevent the acid from splashing out and causing any potential hazards, such as releasing heat or producing fumes. It's safer to dilute the acid gradually to avoid any violent reactions.
How can you prepare a dilute solution of an acid from the concentrated acid?
To prepare a dilute acid solution from a concentrated acid, you can slowly add the concentrated acid to water while stirring. Never add water to concentrated acid as it can cause splattering. Always add acid to water to ensure proper mixing and to prevent violent reactions. Mix well after adding the acid to ensure uniform dilution.
Add acid to water?
When diluting acid, always add acid to water, not water to acid. This helps prevent splashing and potential hazards due to rapid heat release. Start by slowly pouring the acid into the water while stirring continuously to ensure thorough mixing and prevent a sudden exothermic reaction.
How to make dilute h2so4?
To make a dilute solution of sulfuric acid (H2SO4), you can add a specific volume of concentrated sulfuric acid to a larger volume of water while stirring continuously. It is important to always add acid to water, not the other way around, to prevent splashing and heat generation. Remember to wear appropriate protective gear and handle the acid with caution due to its corrosive nature.
If one wants to top up a tank of muriatic acid should one first add the water or concentrated acid?
When mixing acid and water, always add the acid to the water, and add it slowly. Never add the water to the acid.
Do you add water to acid or add acid to water?
you add acid to water
Can you add acid to an ATV battery?
No, but you can add distilled water if it has filler caps and it is low of electrolite. Do not add tap water or acid.
How do you dilute an acid?
To dilute an acid, you can slowly add the acid to water while stirring continuously. Always remember to add acid to water and not water to acid to prevent splattering. Aim for the desired concentration by adjusting the ratio of acid to water.
How should you dilute an acid?
Add specific amount of acid in calculated amount of water.(not water into acid).
Should you add water to acid?
No
Large water add to small acid?
When adding water to acid, it is important to add the acid to the water slowly while stirring continuously. This helps to prevent the acid from splashing out and causing any potential hazards, such as releasing heat or producing fumes. It's safer to dilute the acid gradually to avoid any violent reactions.
How can you prepare a dilute solution of an acid from the concentrated acid?
To prepare a dilute acid solution from a concentrated acid, you can slowly add the concentrated acid to water while stirring. Never add water to concentrated acid as it can cause splattering. Always add acid to water to ensure proper mixing and to prevent violent reactions. Mix well after adding the acid to ensure uniform dilution.
Add acid to water?
When diluting acid, always add acid to water, not water to acid. This helps prevent splashing and potential hazards due to rapid heat release. Start by slowly pouring the acid into the water while stirring continuously to ensure thorough mixing and prevent a sudden exothermic reaction.
Can you add water to sulphuric acid?
Yes, you can. You can also tug on Superman's cape, spit into the wind, and pull the mask off the old Lone Ranger. None of these are good ideas. Never add water to acid, always add acid to water.
How do you mix Trisodiium Phosphate with water do you put water on Trisodiium Phosphate or put Trisodiium Phosphate in water?
I would add water to the trisodium phosphate. If it were an acid, then I would add the acid to the water.
Will it be chemical change if acid add to the water?
NO
