The answer is yes, you would have to buy the correct turbo kit (turbo, oil lines, turbo exhaust manifold, intercooler, piping, etc) and tuning software (DSMlink). It is a good bit of work if you are not experienced with cars and building them. To turbo a non turbo car is is important to make sure the engine can handle it and SHOULD be rebuilt properly to ensure that it will last. If you are serious about this than I suggest reading up on dsmtalk.com and dsmtuners.com both are forums about everything 4G63 and even the 420a engines (non turbo'd eclipse/talon 1995-1999)
Yes, the same harness was used in the non turbo as well as the turbo, Unless you have the 1.8 liter or the 420a engine.
Yes
4g63 (Turbo) or 420A (non-turbo)
the hp for a stock 4g63 non turbo is 160 and tq is 140
oil squirters are installed on a turbo block that shoots oil onto the piston skirts so that detonation does not occur with the high temps in the cylinder.
i wouldn't bother just get a turbo 4g63. the compression is higher on the non turbo 4g63. and the turbo 4g63 has oil squiters to cool the pistion and cylinders. you will spend as much money putting a turbo on your car as the difference would be selling your car and buying a 1g tsi awd
Be sure it is a 4g63, non turbod eclipses (rs and gs models) between 1995 and 1999 use the 420a engine (which you can buy turbo kits for too) But if it is a 4g63 than the answer is yes, you would have to buy the correct turbo kit (turbo, oil lines, turbo exhaust manifold, intercooler, piping, etc) and tuning software (DSMlink). It is a good bit of work if you are not experienced with cars and building them. To turbo a non turbo car is is important to make sure the engine can handle it and SHOULD be rebuilt properly to ensure that it will last. If you are serious about this than I suggest reading up on dsmtalk.com and dsmtuners.com both are forums about everything 4G63 and even the 420a engines (non turbo'd eclipse/talon 1995-1999)
The simple answer is yes. there are two engines in talons, lasers and eclipses. or better known as dsm's. (diamond star motors). there is the 4g63, and the 420a. which both come in turbo and non-turbo models. if you are looking to swap a turbo 4g63 into a non turbo 4g63 shell, the swap is simple. same as if your swapping a turbo 420a into a non turbo 420a shell. now, if your looking to swap a turbo 4g63into a nonturbo 420a or vise versa, you will encounter problems with motor mounts, wiring etc. keep in mind the wiring and ecu's etc will be different on each motor.
yes. both engines are the 4g63. the turbo engines from the 1990-1994 is a 6 bolt 4g63 and the turbo engine from the 1995-1999 is a 7 bolt 4g63.
yes, the 1g eclipses came w/ N/A 4G63's. I found this out the hard way! Check out wikipedia.org for more info.
negative only 420a motor for non turbo or 4g63 for turbo model...or extensive modifying. i don't know why you would want to. 2000+ eclipse motors are garbage as well as the dodge 420a non turbo motor...the only motor that sould have ever been put in the eclipse is the 4g63 period.
no