answersLogoWhite

0

Search results

The audio cable has nothing to do with DELAY. If you have delay, it is caused by something else.

1 answer


In the year 2005, the iPod developed and maintained software called Media Coder. This Media Coder puts together into an out of box transcoding solutions the most cutting-edge video and audio technologies.

1 answer


To achieve a delay after reverb effect in your audio production, you can apply a delay effect to the reverb signal. This will create a sense of space and depth in your audio by adding a delayed echo to the reverberated sound. Adjust the timing and feedback settings of the delay effect to control the length and intensity of the delay.

1 answer


To achieve a delay before or after reverb in your audio production, you can use a digital audio workstation (DAW) with plugins that allow you to apply delay and reverb effects separately. Simply insert a delay effect before or after the reverb effect in the audio chain to create the desired effect. Adjust the settings of each effect to control the timing and intensity of the delay and reverb.

1 answer


Still have questions?
magnify glass
imp

A delay before distortion in audio signals can be caused by factors such as signal processing, filtering, or the limitations of the equipment used to capture or reproduce the audio.

1 answer



A delay pedal is an audio effect used in music to play back a sound created and then stored into an audio storage medium. The sound can be played back once, or multiple times. The delay pedal can add texture to music.

1 answer



An audio cable alone can not cause a DELAY in the sound.

We're not into answering test questions here. That is cheating. This question has been asked several times.

1 answer


Adding a delay before reverb in audio production can create a sense of depth and spaciousness in the sound. It can make the audio feel more immersive and natural, enhancing the overall quality of the mix.

1 answer


You use it as a send or as an insert.

1 answer


Consumer Ultra-Low Voltage was created in 2009.

1 answer


Some T.V.s have audio lag, most of the time you can adjust this.

1 answer


LOW ping. The lower the better

Ping is the delay between your commands and your players actions. So if you have low ping there will be a very short dalay but if you have high ping there will be a delay.

2 answers


Reverb and delay are both audio effects used in production. Reverb creates a sense of space and depth, while delay repeats the sound with a time delay. Using reverb before delay can enhance the mix by creating a more natural and cohesive sound, as the reverb provides a sense of space for the delayed sound to exist in. This can result in a more immersive and polished overall sound quality.

1 answer


The link below has an audio key to pronunciation .

1 answer


you get your oppenet to low health, then you do your ultra to kill them. that's how

1 answer


Jonathan Coder is 6' 1".

1 answer


Olivia Coder is 5' 5".

1 answer


Ffmpegx is used by the Mac operating system. It is an audio and video coder and decoder used for making DVD's. There are versions that are used in Windows as well.

1 answer


The best low latency wireless headphones for musicians are the Sennheiser HD 450BT and the Sony WH-1000XM4. These headphones offer high-quality sound and minimal delay, making them ideal for musicians who need precise audio while performing or recording.

1 answer


A medical coder types out codes then sends them to insurance companies

1 answer


Ron Coder was born on 1954-05-24.

1 answer


Low frequencies can impact the quality of sound in audio recordings by adding depth and richness to the overall sound. However, excessive low frequencies can cause muddiness and distortion, affecting the clarity and balance of the audio.

1 answer


How much money does a certified medical coder make? How much money does a certified medical coder make?

1 answer


Some ultra low-cost airlines operating in the USA include Spirit Airlines, Frontier Airlines, and Allegiant Air.

1 answer


Alden C. Coder died in 1985-06.

1 answer


Alden C. Coder was born on 1909-12-07.

1 answer


A medical coder (or a clinical coder) is a person who classifies and categorizes clinical statements. Their job is to organize health care records and other health data.

1 answer


the basic objectives of outsourcing is to satisfy byers and coder without any misunderstanding between byer and coder the basic objectives of outsourcing is to satisfy byers and coder without any misunderstanding between byer and coder

1 answer


The medical coder salary may vary from 25000$ to 40000$. The person who is willing to choose this medical coder job should have some required qualification.

1 answer


Yes, as Imax is not true digital video/audio and Ultra AVX is full digital thus Ultra AVX give true HD quality audio and video as well as Enhanced RealD 3D picture and sound. The only thing better about Imax is that it has a bigger screen but that isn't an issue; because the Ultra AVX makes you feel like you're there in the movie!

1 answer


Jonathan Coder was born on December 22, 1963, in Chico, California, USA.

1 answer


Olivia Coder was born on May 25, 1992, in Auburn, California, USA.

1 answer


These are medium, low and very low frequency radio waves as well as ultra low, super low and extremely low frequency waves.

1 answer


Audio (sound) frequencies above the range of the human ear. This is generally said to be above 20,000 hertz.

1 answer


It depends on where you live. In the Chicago area a hospital coder makes between $20 and $30 an hour. I am a contract coder and make $35 an hour.

1 answer


Yes they do. Sometimes they'll have audio delay as well :)

1 answer


Reverb creates a sense of space by simulating the reflections of sound in a room, while delay repeats the original sound with a distinct time gap, creating an echo effect.

1 answer


The cast of Coder - 2013 includes: Daniel Cathey Kayli Winger

1 answer


low speed, high speed and ultra centrifuges

1 answer


Not yet, nor is it important.

1 answer


The low pass filter effect cancellation in audio processing can be achieved by using a high pass filter to remove the low frequency components that are causing the cancellation. This allows the desired audio signals to be heard more clearly without interference from unwanted frequencies.

1 answer


Senz (ID: #2) was the first coder. AND THEY WERE ONLY THE BEST PERSON EVER. :D

1 answer


Possible reasons for poor sound quality include low-quality audio equipment, improper microphone placement, background noise interference, low internet bandwidth causing audio distortion, or audio settings not optimized for clear sound.

1 answer



The introduction of digital television has brought some problems as well as many benefits. One such problem is that audio and video signals are processed in packets of data rather than strictly in real time (In other words, all data is delayed for a short amount of time while it is being sent, received or processed). For example, broadcast video signals are compressed for transmission and then un-compressed when they reach a domestic receiver. The process can take up to about a second and so the video signal is later than the audio. Audio processing adds similar delays to the sound. Receivers normally take the delays into account and make sure that the audio and video signals are in time with each other by the time they reach the viewer.

Audio can be out of time with the video for a number of reasons. Taking digital audio into a home theater system might add some additional delay. Running video through a scaler before it reaches the display may delay video in a similar way. The best way to overcome the problem is to avoid the delay in the first place.

If that is not possible, a careful read of the instruction manuals for all equipment in the system may reveal a method to delay a signal by a fixed amount, so getting audio and video back in time once more. If that doesn't do the job, then additional equipment may be needed. Audio delays and video delays can be obtained and they can be programmed to add certain delays to a signal. The equipment is not cheap and they can be difficult to set up properly.

If possible, try to keep all digital signals as digital throughout the signal chain. This will often eliminate the problem.

In the case of this question, the audio is later than the video, so a video delay will be needed. Make sure that the inputs and outputs on the delay are correct for the installation (HDMI, composite, S-video or component for example). Be sure that you understand where the delay is being caused to make sure that the delay is going to work reliably. For example, if the delay is only noticed on DVD replay, make sure the video delay unit does not delay signals coming from a cable receiver as well. Take the time to understand the problem and the solution will become simple. remember that video or home theater consultants may well be able to offer a cost effective solution far faster than a home owner is able to.

1 answer


B for silicon

C low power audio frequency

1 answer


You should not show the underwear under the pants. It is considered bad taste and sometimes disrespectful.

Either wear ultra-low rise underwear or non at all.

Risa

1 answer