The word disambiguation refers to the process of trying to resolve conflicts that arise when a single term is ambiguous. Disambiguation seeks to have clarity from ambiguity.
1 answer
Disambiguation is the process of resolving the conflicts that arise when a single term is ambiguous. It also means making something clear.
1 answer
The word "disambiguation" is a noun, a word for wording that has undergone clarification, from which ambiguity has been removed.
A noun is used as the subject of a sentence or a clause, and as the object of a verb or a prepositon.
Example sentence: "That was a great lecture. Your disambiguation of the material made it much easier to absorb." (subject of the sentence)
1 answer
A toggle switch, typically a mechanical or electronic component, can act as a toggle by altering between two states, such as on and off.
1 answer
The noun toggle is the singular form; the plural form is toggles.
1 answer
A toggle is a metal or wooden pin or rod, or similar, which helps you to secure things.
1 answer
The way to sew on a toggle button is to first pin the toggle button in place on the jacket. Next, take a threaded needle and knot it tightly. Insert the threaded needle through the loop in the toggle at least four or five times, securing the know underneath the fabric. Tie and knot and the toggle should be in place.
1 answer
What is disambiguation? You should probably figure that out first.
1 answer
Found this on Wikipedia, only thing to find. disambiguation
1 answer
Toggle bolts can typically hold a maximum weight capacity of 50 to 100 pounds, depending on the size and type of the toggle bolt.
1 answer
To install toggle bolts properly, first drill a hole in the wall, insert the toggle bolt through the hole, then tighten the bolt until it is secure. Make sure the toggle wings open up behind the wall to provide strong support.
1 answer
To use toggle bolts in drywall for hanging heavy objects securely, first drill a hole in the drywall. Insert the toggle bolt through the hole and tighten it until it is secure. Then, attach the object to the toggle bolt using the provided hardware. Make sure the toggle bolt is rated for the weight of the object you are hanging.
1 answer
when dealing with bit, there are only 2 bits which are '0' and '1'. when the current bit is '0', if we toggle this bit, it will become '1' and when the current bit is '1', if we toggle this bit, it will become '0' that is
1 answer
you can just use a toggle switch,,,you need a relay capable of the amps it takes for the starter.it would connect between the starter and the battery,then you would need a toggle switch preferably a momatary toggle switch to activate the relay.
1 answer
To use toggle anchors effectively for securing heavy objects to drywall, follow these steps:
By following these steps, you can effectively use toggle anchors to secure heavy objects to drywall.
1 answer
Toggle = back and forth, or on and off.
A toggle switch toggles (turns) a light or other device on or off.
Good example is a light switch (the wall kind)-- a toggle switch must also be of the "throw the stick back and forth" kind. Which a light switch basically is.
2 answers
how to replace window toggle switch 1999 buick century
1 answer
Synonyms for toggle: adjuster, dial, knob, on/off, power switch, switch, tuner, push button
1 answer
http://en.wikipedia.org/wiki/Disneyland_(disambiguation)
1 answer
the Sonix X zone - it is check Sonic (disambiguation)
1 answer
Toggle is the fastest type of MLC NAND by a considerable margin. There is a larger performance gap between toggle and synchronous than there is between synchronous and asynchronous.
1 answer
To install and use drywall toggles effectively, follow these best practices:
1 answer
To install toggle anchors for maximum stability and support, first drill a hole in the wall. Insert the toggle anchor into the hole and tighten it until secure. Then, attach the item to the anchor using a screw. Make sure the toggle anchor is properly aligned and tightened to ensure stability and support.
1 answer
To properly install a toggle bolt for hanging heavy objects on drywall, first drill a hole in the wall, insert the toggle bolt through the hole, and tighten it until secure. The toggle bolt will expand behind the drywall to provide strong support for the heavy object.
1 answer
Hit the escape button and go to the Keybindings menu. Find the option that says "Toggle Run" or "Toggle Walk/Run" and bind a key to it which you have available. From then on, that key will toggle Walk/Run instead of the / key.
1 answer
To securely mount heavy objects on metal studs using toggle bolts, first locate the studs with a stud finder. Then, drill a hole slightly larger than the toggle bolt diameter. Insert the toggle bolt through the object and into the hole, then tighten the bolt until secure. Make sure the toggle wings are fully expanded behind the stud for maximum support.
1 answer
When a filter has been applied to a datasheet, clicking the Toggle Filter button will
1 answer
A toggle bolt can typically hold up to 50 pounds when properly installed.
1 answer
To properly install toggle bolts for securing heavy objects to drywall, first drill a hole in the drywall. Insert the toggle bolt through the hole and tighten it until it is secure. Make sure the toggle is fully open behind the drywall to provide maximum support for the heavy object.
1 answer
http://dictionary.reference.com/search?q=harlequin
http://en.wikipedia.org/wiki/Harlequin_(disambiguation)
1 answer
To securely mount your TV using toggle bolts, first, drill holes in the wall where you want to mount the TV. Insert the toggle bolts into the holes and tighten them until they are secure. Then, attach the TV mount to the toggle bolts and make sure it is firmly in place before mounting the TV onto the bracket. Make sure to follow the manufacturer's instructions for the specific toggle bolts and TV mount you are using to ensure a safe and secure installation.
1 answer
To properly use toggle bolts for hanging heavy objects on drywall, first drill a hole in the wall. Insert the toggle bolt through the hole and tighten it until secure. Then, attach the object to the bolt using the provided hardware. Make sure the weight of the object is within the weight limit of the toggle bolt.
1 answer
To use toggle bolts effectively for hanging heavy objects securely, first drill a hole in the wall. Insert the toggle bolt through the hole and tighten it until it is secure. Then, attach the object to the bolt using the provided hardware. Make sure the toggle bolt can support the weight of the object before hanging it.
1 answer
Someone can purchase toggle clasps at a variety of different stores, online and in store. These stores include: Bead Supermarket, Amazon, Bead Addict, Dizzy Beads, Bbeads and Bead Crazy. These websites offer toggle clasps at an inexpensive price.
1 answer
One of the main advantages of a push button over a toggle switch is there is less room for accidental engagements. A toggle switch can easily be turned on or off by accident and a push button has to be intentionally touched to turn it on or off.
1 answer
To toggle the multi-camera view in Premiere Pro, click on the "Toggle Multi-Camera View" button in the program monitor. This allows you to easily switch between different camera angles while editing your video.
1 answer
One can purchase a toggle clamp from a hardware or DIY store locally to themselves or online at such places as Amazon, thetoggleclampstore and rockler.
1 answer
toggle button
2 answers
Toggle Toxx is a fictional character from the webcomic "Cucumber Quest." It is not possible to determine how they are feeling today as they are not a real person.
2 answers