answersLogoWhite

0

Search results

Typically there are two types of submittals for rebar. the first is placing drawings. These drawings will act as a set of instructions for fabrication and installation of the rebar. These drawings can be created and supplied by the rebar fabricator or a specialized outside detailer can provide them for you.

The second is the actual product data which indicates the mill the material came from, its chemistry composition and production information. For this, the fabricator or supply house you purchase the rebar from should be able to supply you with the sheet data you need. Both the placing drawing and material data sheets will be submitted to the architect and engineer of record to review and verify that the rebar conforms with their intent and design.

1 answer


Rebar is used to strengthen and support concrete structures. Concrete on its own is very strong when it comes to handling compression, but it can crack or fail when stretched or bent. That’s where rebar comes in. Rebar, or reinforcing steel bars, helps concrete handle tension and bending forces. By adding rebar to concrete, engineers make sure that buildings, bridges, foundations, and other structures stay safe and hold up well under various loads and stresses.

The placement and detailing of rebar are just as important as the concrete itself. Rebar must be arranged in a way that it can resist the forces the structure will face over time. This is why detailed drawings and planning are essential. Silicon Engineering Consultants provides professional rebar detailing services that help ensure rebar is placed correctly according to design and safety standards. These services help builders avoid mistakes during construction and improve the long-term durability of the structure.

In short, rebar is used to make concrete structures stronger, safer, and more reliable, and proper rebar detailing plays a key role in that process.

2 answers


Surya Rebar cold upsetting machine, mainly used for upsetting the head of the ribbed TMT Bar in construction engineering and is the key equipment to realize the connection of rebar. The material in cold forging processing is mainly disc or wire. High production efficiency (the speed of the cold forging machine can reach 60 to 600 PCS per minute). Then workers can use the same specification threaded rebar couplers to connect two steel bars that have been processed.

1 answer


Rebar Detailing is a procedure of making shop drawings for the steel reinforcement for the development procedure. The Rebar Detailing procedure incorporates the position, bending shapes, amount, description, laps of the reinforcing steel and measurements. The Rebar Detailing Drawings are made to incorporate the separating, area, rebar size and lap of steel. The Rebar Detailing Services includes: Rebar Detailing Services, Rebar Shop Drawings Services, Rebar fabrication Services, Rebar Framing Plan Design, Rebar Structure Foundation, Rebar Pit Design, Rebar Framing Plan, Rebar Beam Design, Rebar Structure Steel Detailing, Structure Foundation Rebar Detailing.

1 answer


Still have questions?
magnify glass
imp

The unit of measurement for rebar thickness, such as 14mm, is in millimeters (mm). This measurement refers to the diameter of the rebar.

1 answer


Rebars are used for reinforcing concrete and making it stronger and more reliable. While concrete is very good at withstanding compression (being pushed together), it doesn’t handle tension (being pulled apart) well on its own. Rebars, or reinforcing bars, are placed inside the concrete to help it resist tension and bending forces. This added strength prevents cracks and structural failure, ensuring that buildings, bridges, foundations, and other concrete structures stay safe and last longer.

Rebars are used in a wide range of construction applications — from residential homes to large-scale industrial and infrastructure projects. The correct placement, size, and bending of rebars are essential for the structure’s overall stability and performance. That’s why rebar detailing is so important. Silicon Engineering Consultants offers rebar detailing services that provide accurate, practical drawings showing how rebars should be arranged within a structure. These detailed plans help reduce errors during construction, save time, and improve safety on-site.

In summary, rebars are used for strengthening concrete so it can handle both compression and tension, playing a vital role in the durability of concrete structures.

2 answers


Typically you see the bar spaced at 12" o/c. But depending on the height of the walls reqd, the soil bearing capacity, foundation loading, geographic location and other site specific details, there is no typical spacing. Spacing can also be determined by the size of the bar specified. A smaller bar usually is tighter spacing, a larger bar increased spacing. Best to have the site situation reviewed by an engineer for your specific application.

1 answer


Rebar detailing is the process of creating detailed drawings and schedules that specify the placement, dimensions, and quantities of reinforcing steel (rebar) in concrete structures. These drawings serve as a critical guide for contractors, ensuring that the reinforcement is installed correctly to provide strength and durability to concrete elements like beams, columns, slabs, and foundations.

A well-executed rebar detailing package includes:

✔ Bar bending schedules (BBS) – listing shapes, sizes, and quantities

✔ Placement drawings – showing exact rebar positioning

✔ Material specifications – including grade, spacing, and lap lengths

✔ Anchorage and splice details – for proper load transfer

Poor detailing can lead to construction errors, safety risks, and costly rework. This is why many firms rely on specialized providers like Silicon Engineering Consultants, which combine engineering expertise with advanced BIM tools to deliver error-free, constructible rebar details that comply with international codes (like ACI, BS, or IS).

2 answers


To lay rebar for concrete effectively, follow these steps:

  1. Determine the required rebar size and spacing based on the project specifications.
  2. Place the rebar in the correct position within the formwork, ensuring it is properly supported and secured.
  3. Use tie wire to connect and secure the rebar at intersections and corners.
  4. Use chairs or supports to lift the rebar off the ground to the desired height.
  5. Double-check the placement and alignment of the rebar before pouring the concrete.

By following these steps, you can effectively lay rebar for concrete to ensure a strong and durable structure.

1 answer


8mm rebar weighs 0.395kg/m

1 answer


There are a variety of retail locations and online stores that sell rebar. For example, rebar can be purchased from Lowe's, Home Depot, or online at Metals Depot.

1 answer



Deformed rebar has either indentations or ridges in a regular pattern on the bar surfae.

1 answer



The weight of 5 rebar rods can vary depending on the diameter and length of the rebar. As a general estimate, a standard size #5 rebar (5/8-inch diameter) that is 20 feet long weighs around 15.41 pounds. Therefore, the weight of 5 such rebar rods would be approximately 77.05 pounds.

1 answer


You can create a Rebar cutting list by using a software program such as Microsoft Excel or Google Drive. Use the table to create a cutting list for Rebar.

1 answer


Epoxy is not required in rebar connections as concrete and wire are used to hold it in place. Rebar is a reinforcement place inside masonry structures to provide increased strength.

2 answers


12" of #4 rebar = 0.668 lb/ft

1 answer


The number of Y16 rebar pieces in one ton depends on the length of each rebar. Y16 rebar has a nominal diameter of 16 mm and weighs approximately 1.58 kg per meter. Therefore, in a ton (1,000 kg), there would be around 632 meters of Y16 rebar, which translates to about 63 pieces if each rebar is 12 meters long. For different lengths, the number of pieces will vary accordingly.

1 answer


Unit weight of 36mm rebar is 7.99 kg per meter

2 answers


There are approximately 130 pieces of Y10 rebar in a ton.

2 answers


The fact that BFRP Rebar is nonconducting makes basalt rebar a good option for buildings that house MRIs or data-intensive operations.

Basalt Fiber Reinforced Polymer Rebar( BFRP Rebar ) does not conduct electricity or induce fields when exposed to Radiofrequency Energy.

Compared to other types of rebar, basalt fiber has excellent non-conductive and electromagnetic properties, and can be widely used in power and radar and other military and civil engineering.

The fact that BFRP Rebar is nonconducting makes basalt rebar a good option for buildings that house MRIs or data-intensive operations.

At Arab Basalt Fiber Company, we produce BFRP Rebar and We envision a world where all concrete is strengthened with sustainable & eco-friendly material such as basalt fiber composites.

1 answer


i just found it online #5 rebar 20' lenght bundle of 100 for $1295. or $13.00 ea.

1 answer


The amount of rebar depends on the thickness of what you are making. All three dimensions.

1 answer


Rebar takeoff involves the process of calculating the quantity and specifications of rebar needed for a construction project. This typically includes measuring the lengths, diameters, and types of rebar required based on structural drawings and specifications. The takeoff is often done using specialized software or manually with detailed attention to ensure accuracy for ordering and cost estimation. Proper rebar takeoff is crucial for project budgeting and ensuring structural integrity.

1 answer


Black Steel Rebar is a regular Mild steel rebar which is used in most of the buildings.

the other types in rebar are 1. Epoxy coated & 2. Stainless Steel

epoxy coated bars are regular rebars coated with an anti rust material.

these are used in marine constructions.

2 answers


To ensure maximum strength and durability when installing mini rebar in a concrete structure, it is important to follow these best practices:

  1. Properly clean and prepare the area where the mini rebar will be installed.
  2. Use the correct size and spacing of mini rebar according to the design specifications.
  3. Securely tie and position the mini rebar in place to prevent shifting during the concrete pouring process.
  4. Ensure that the mini rebar is fully embedded in the concrete to provide maximum reinforcement.
  5. Use a high-quality concrete mix and proper curing techniques to enhance the bond between the mini rebar and the concrete.
  6. Regularly inspect and maintain the mini rebar to prevent corrosion and ensure long-term durability of the structure.

1 answer


To determine the amount of rebar needed for a 20 x 60 x 8 inch slab, you first need to calculate the perimeter and then the spacing of the rebar. For a typical slab, rebar is usually placed at 12 to 18 inches apart in each direction. Assuming you use #4 rebar (0.5 inches in diameter) spaced at 16 inches on center, you would need approximately 8 pieces of rebar along the 20-inch side and 5 pieces along the 60-inch side, totaling around 13 lengths of rebar, considering overlaps and cut-offs. Always consult local building codes and structural engineers to confirm specific rebar requirements for your project.

1 answer


The weight of 40mm rebar per meter is approximately 9.87 kilograms (21.76 pounds).

2 answers


Rebar detailing involves creating detailed drawings and schedules that specify the placement, size, and shape of rebar in concrete structures. In contrast, rebar fabrication is the process of transforming raw steel into the specified shapes and sizes needed for construction, essentially preparing the rebar for installation.

Rebar Detailing

Purpose: Focuses on the design aspect, creating detailed drawings and models that outline how rebar should be placed within concrete structures.

Components: Includes specifications for size, shape, quantity, and bending details, ensuring that all elements are accurately represented for construction.

Outcome: Produces shop drawings that guide the fabrication process and installation, facilitating communication among project stakeholders.

Rebar Fabrication

Purpose: Involves the physical process of cutting, bending, and shaping raw steel rebar into the required forms as per the detailing specifications.

Methods: Can be performed on-site or in a factory setting, utilizing specialized machinery to ensure precision and efficiency.

Outcome: Results in ready-to-use rebar that is prepared for installation in construction projects, ensuring structural integrity and compliance with design specifications.

1 answer


You have to find a chart that will indicate the weight per unit of measure for the appropriate rebar size. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. Charts are available throughout the web or at CRSI.org.

1 answer



80% 3,425 lb

1 answer



The MAX RB395 is a battery powered hand tool that ties rebar in less than a second. The tool can tie #3x#3 up to #5x#6 rebar . It can make 120 ties per rool of wire and 360 ties per battery charge. The MAX rebar tiers have been investigated by NIOSH as a way o reduce muscular skeletal disorders for construciton workers, thus reducing insurance costs for contractors.

2 answers


Yes, it is recommended to use rebar for a 4-inch slab to provide additional strength and prevent cracking.

1 answer


16mm weighs 1.552 kg/m

1 metric tonne 1000 kg

So about 644m length

4 answers


To pile rebar bent to a slab, first determine the required lengths and bends based on the slab design and structural specifications. Using a rebar bender, create the necessary bends at specified angles while ensuring the rebar is adequately supported. Once bent, position the rebar according to the slab’s layout, securing it with ties or supports to maintain proper spacing and alignment before pouring the concrete. Always follow engineering guidelines to ensure structural integrity.

1 answer


You need the size of the rebar involved to calculate the weight. Charts can be found at CRSI.org or Rebarapps.com.

Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. You need to know the size of the bar to calculate.

1 answer


You have to find a chart that will indicate the weight per unit of measure for the appropriate rebar size. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. Charts are available throughout the web or at CRSI.org.

1 answer


ASTM A615 refers to the material properties of rebar in general. The rebar sizes vary but are all milled to this specification. So depending on project, sizes vary in use. Best to look at contract documents for sizes required in your case.

1 answer


The difference between the two is in the application. A development length is the amount of rebar length that is needed to be embedded or projected into concrete to create a desired bond strength between the two materials. The lap splice length is the length two rebar pieces must overlap and be tied together to create a bond as if there was no break and the run is "continuous". So simply put, development is rebar to concrete, splice is rebar to rebar. The lengths of both splice and development do vary. They are dependent upon different factors. These include but are not limited to concrete strength, rebar size, rebar coating and concrete cover or clearance. So when you see a chart on one project, it can differ from another for these reasons.

1 answer


Grade 60 rebar is generally considered better for buildings compared to grade 40 rebar due to its higher yield strength, which allows for greater load-bearing capacity and improved structural performance. This increased strength can lead to reduced material usage and lighter reinforcement sections, potentially lowering construction costs. Additionally, grade 60 rebar provides enhanced ductility, which is crucial for resisting seismic forces in earthquake-prone areas. Overall, for most construction applications, grade 60 rebar is the preferred choice.

1 answer


To ground or bond rebar for a new addition, ensure the rebar is properly connected to the grounding system by using grounding clamps or bonding jumpers. The rebar should be tied together securely to create a continuous pathway for electrical grounding. Connect the rebar to the grounding electrode system, such as a ground rod or grounding plate, typically using a minimum #6 AWG copper wire. Finally, ensure compliance with local electrical codes and regulations for grounding and bonding practices.

1 answer


You have to find a chart that will indicate the weight per unit of measure for the appropriate rebar size. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. Charts are available throughout the web or at CRSI.org.

1 answer


The amount of rebar in a cubic meter of concrete can vary depending on the design specifications of the concrete structure. Typically, rebar makes up around 1-2% of the total volume of concrete, so in a cubic meter of concrete, there may be around 20-40 kilograms of rebar.

2 answers


The best technique for using a rebar hammer effectively in construction projects is to hold the hammer with a firm grip, aim accurately at the rebar, and strike with controlled force to drive the rebar into the desired position. It is important to maintain proper body mechanics and use the hammer in a consistent and rhythmic motion to ensure efficient and precise results.

1 answer


3/8" in diameter.

1 answer