The conversion factor from 1 pascal to pounds per square inch (psi) is approximately 0.00014503773773.

1,348.85 pounds per square inch.

125 x 453.6 g x .155 / 1 cm2 = 8,788.5 grams per square centimeter

Gypsum or plaster board3

3/8 inch 1.56 pounds per square foot

1/2 inch 2.08 pounds per square foot

5/8 inch 2.60 pounds per square foot

The conversion factor from pascals to pounds per square inch (psi) is 1 pascal 0.00014503773773 psi.

1 pound-force per square inch equals 6.89476 kilopascals

23,000 pounds per square inch equals 16170000kg per square meter.

Kilograms per square meter x 0.001422 equals pounds per square inch.

1 ATM is equal to approximately 14.7 pounds per square inch.

From the NASA link, below:

"Earth's atmosphere is pressing against each square inch of you with a force of 1 kilogram per square centimeter (14.7 pounds per square inch)."

350 kilopascals = 50.76 pounds per square inch.

To convert pounds per square feet to pounds per square inch, you need to divide by 144 since there are 144 square inches in a square foot. In this case, 32 pounds per square foot would be equal to 0.222 pounds per square inch.

220 kilopascals (kPa) are 31.908303657402257 pounds per square inch (psi).

The conversion factor from pascal (Pa) to pounds per square inch (psi) is 1 Pa 0.00014503773773 psi.

To convert pressure from pascals (Pa) to pounds per square inch (psi), you can use the conversion factor 1 Pa 0.00014503773773 psi. Multiply the pressure in pascals by this conversion factor to get the pressure in pounds per square inch.

Pounds per square foot x 0.006944 equals psi

PSI (pounds per square inch) depending what part of the world you live in.

Gypsum or plaster board3

3/8 inch 1.56 pounds per square foot

1/2 inch 2.08 pounds per square foot

5/8 inch 2.60 pounds per square foot

i9t cost £453.00 pounds to but per square inch. i9t cost £453.00 pounds to but per square inch.

pounds per square inch

1kg per sq cm is equal to about 14.2 pounds per sq inch.

Inches of water x 0.03613 equals pounds per square inch (psi).

This question is nonsense.

180cm is a measurement of length

Pounds per square inch is a measure of pressure

They are not related.

Pounds per Square Inch

AND

Pounds per square inch.

It is used to measure pressure, especially with tires.

To convert pressure units from pascals (Pa) to pounds per square inch (psi), you can use the conversion factor of 1 psi 6894.76 Pa. Simply divide the pressure in pascals by 6894.76 to get the equivalent pressure in pounds per square inch.

Pressure in seawater at 100 feet is 44 psi. Or, .44 pounds per square inch per 1 foot. For Fresh water, it is .43 psi per foot.

Given that there are 144 square inches per square foot, 100,000 pounds per sqaure foot equals 694.44 pounds per square inch.

Bar x 14.5 = psi

pounds per square inch

Pounds Per Square Inch.

A human bite can exert a pressure of around 150-200 pounds per square inch.

psi is the abbreviation, also known as an Acronym.

It stands for "Pounds Per Square Inch"

The recommended pressure for 24-inch bicycle tires is typically between 35 to 60 pounds per square inch (psi).

Thrust is usually measured in 'pounds per square inch' or psi.

Multiply by 144, since there are 144 square inches in a square foot (12x12).

4.5 bar is equivalent to approximately 65.26 pounds per square inch.

Air has a weight of about 14.7 pounds per square inch at sea level.

One square foot of water that is 1 inch deep weighs approximately 0.578 pounds. This is calculated based on the fact that 1 cubic foot of water weighs about 62.4 pounds, and since there are 12 inches in a foot, 1 inch of water in a square foot amounts to 1/12 of a cubic foot. Thus, the weight is 62.4 pounds divided by 12, which equals around 5.2 pounds per inch, and for 1 square foot, it totals to approximately 0.578 pounds.

Pounds per square inch

Pounds per square inch

psi

"PSI" stands for "pounds per square inch," which is a unit of pressure commonly used in the United States to measure pressure of gases or liquids in various systems.

24 bar is approximately equal to 348.11 pounds per square inch (psi).

0.55 MPa (megapascal) is approximately equal to 79.77 pounds per square inch (psi).

Steel can withstand a maximum pressure of around 30,000 pounds per square inch (psi).

1.171

There is no such thing as a 'cubic square inch'.

The density of aluminum is 0.0858 pound per cubic inch. (rounded)

Both are a measure of pressure. However, they vary a lot. 1 pascal is 0.000145037738 pounds per square inch

About 14,000 pounds per square inch

You cannot convert gallons per minute to pounds per square inch. The quantities do not have the same meaning. Gallons are a measure of volume, and pounds are a measure of weight. Minutes are a measure of time, and square inches are a measure of area.