0
'She poured wax into the mould'
'The bread was covered in mould'
1 answer
A mass of metal cast into a mould is called either an ingot mould or a cold mould. the one that is ready for recasting is usually the ingot mould. A cold mould is one that has been cast on design that maintains its mould.
1 answer
For Injection mold, the main metal used in steel.
There many different steels are used, for example, P20, 1.2311,718H,1.2738, H13, 1.2344, 2316,S136, etc..
Usually for mould based, the steel will be SC45#,P20 or 1.2311.
For daily household product, the stell will be 718H,1.2738
For PVC material ,steel will be 1.2316 or S136,
For food product mould, for example preform mould or food contaier mould, the steel will be S136. this is stainless mould steel.
Sino Mould is a company with over 20years in making plasti mould, if you want to know more about mould steel, pls contact us. mould@sinomould.com
1 answer
Mould staining can be wiped off by Concrobium Mold Stain Eraser.
1 answer
Before making the mould, we need to do the product design and mould design, then according to the cliects' requirement, we need to prepare the mould steel, some steel is expensive, some is cheaper, it is depened on client. During making the mould, we need to tool the mould, which will costs lots of labour cost and tooling costs. if tyhe mould has some problem, we also need to modify it, is is also a rxtra cost.
1 answer
As it cools it solidifies, So you can make a mould around a piece of metal, melt it into the mould and when it cools it would change back into a solid to the shape of the mould.
1 answer
No it does not, firstly mould means to mold like for example you mould clay
1 answer
examples of saprophytes:Rhizopus(bread mould), mucor(pin mould), Yeast, and Agaricus( a mushroom)
1 answer
examples of saprophytes:Rhizopus(bread mould), mucor(pin mould), Yeast, and Agaricus( a mushroom)
1 answer
A bed-mould is an architectural term for the mouldings under the projecting part of every cornice.
1 answer
Mould is a fungi growth typically a hyphae but it can be a part of the Zygomycota, Deuteromycota and Ascomycota groupings.
1 answer
The homophone for "mold" is "mould". Both words sound the same but have different spellings and meanings.
2 answers
get tiara mould at al khaid east of furnace and use silver bar with mould at furnace
1 answer
Yes, mould reproduces by releasing spores into the environment. These spores can travel through the air and land on surfaces where they can grow and form new mould colonies under the right conditions.
1 answer
The scientific name of bread mould is Rhizopus stolonifer.
3 answers
To quote for an injection mold, first you need check the sample or product design to know the mould structure. Then you calcuate mould steel cost, labot cost, tooling cost. then you add all cost togther.
Looking for plastic mould supplier, pls send details to: mould@sinomould.com
1 answer
Not sure what you mean. Penicillin is extracted and refinedfrom a mould. (Or mold if you're in the US!)
2 answers
blue cheese
Mould? Mouldy cheese. Mould filled chedder. By the way, that could kill you because it doesnt have the correct mould it... 0_0
3 answers
Mould growth increases when moisture levels are higher because mould spores need water to germinate and thrive. Conversely, reducing moisture levels can inhibit mould growth as it makes the environment less conducive for spores to develop. Mold spores are everywhere, but without sufficient moisture, they typically remain inactive.
1 answer
Fruit mould is a fungus called Penicillium from which is made penicillin. Bread mould is a fungus Mucor and a slime mould is probably a different, more obscure type of fungus.
6 answers
Usually for plastic injection mould, the material is steel.And in some special case Aviation aluminum can be used. we have experince in making plastic injection mould with aluminium. if you want more details, pls contact us: Sino Mould Co., Ltd, www.sinomould.com, mould@sinomould.com
2 answers
The effectiveness of mould remover for tents in removing stubborn mould stains and preventing future growth on outdoor gear can vary depending on the product and how it is used. It is important to follow the instructions carefully and test the product on a small area first. Some mould removers may be more effective than others, so it is recommended to research and choose a product that is specifically designed for outdoor gear. Regular cleaning and maintenance can also help prevent mould growth in the future.
1 answer
Yes, i think so. or maybe not. I dont really know. You spelled it wrong too.
2 answers
