Donald V. Richardson has written:
'Laboratory operations for rotating electric machinery' -- subject(s): Laboratory manuals, Electric motors, Electric machinery
1 answer
A guard is a device designed to prevent injury from rotating machinery.
1 answer
Elias Morshed Sabbagh has written:
'Unbalance in alternating-current rotating machines' -- subject(s): Electric machinery, Alternating current
1 answer
Radial forces play a crucial role in the stability and performance of rotating machinery. These forces help to maintain the balance and alignment of the rotating components, ensuring smooth operation and preventing vibrations that can lead to mechanical failures. By properly managing radial forces, engineers can optimize the efficiency and reliability of rotating machinery.
1 answer
Michael Liwschitz has written:
'Winding alternating-current machines' -- subject(s): Alternating current, Armatures, Electric machinery
'Electric machinery' -- subject(s): Electric machinery
1 answer
John Bernard Wilcox has written:
'Dynamic balancing of rotating machinery' -- subject(s): Balancing of machinery, Machinery, Vibration
1 answer
Xusheng Chen has written:
'Induction generator modeling and relaying' -- subject(s): Electric machinery, Induction, Electric motors, Induction, Induction Electric machinery, Induction Electric motors
1 answer
Mikhail Moiseevich Botvinnik has written:
'Asynchronized synchronous machines' -- subject(s): Electric machinery, Synchronous, Synchronous Electric machinery
1 answer
Isidor Kerszenbaum has written:
'Inspection of large synchronous machines' -- subject(s): Electric machinery, Synchronous, Inspection, Synchronous Electric machinery
1 answer
Henry R. Reed has written:
'Experiments and tests on electrical circuits and machinery' -- subject(s): Electric engineering, Magnetism, Laboratory manuals, Electric circuits, Electric machinery
1 answer
A worn bearing in rotating machinery can lead to increased friction, heat generation, and potential equipment failure. It is important to monitor bearing condition through regular inspections and maintenance to prevent downtime and costly repairs. Replacing worn bearings promptly can help maintain smooth operation and prolong the life of the machinery.
2 answers
Transformers inherently do not have frictional losses, but transformers and rotating machines perform completely different functions, so I'm not sure it is fair to compare them. Transformers are used to transform electric energy (the input is electric energy, and the output is electric energy). Rotating machines either take electric energy and convert it to mechanical/kinetic energy, or take kinetic energy and convert it to electric energy.
2 answers
Dynamic balancing involves calculating and offsetting the weight imbalances in rotating machinery by adding or removing weight to achieve a balanced state. This is done by mounting counterweights on the rotating part of the machinery to cancel out the vibrations caused by imbalances, ensuring smoother and more efficient operation. The goal is to minimize vibrations and maintain the machinery's performance and longevity.
1 answer
Charles I Hubert has written:
'Electric machines' -- subject(s): Electric engineering, Electric machinery
1 answer
Samuel Sheldon has written:
'Alternating-current machines' -- subject(s): Electric machinery, Alternating current
'Electric traction and transmission engineering' -- subject(s): Electric railroads
'Dynamo electric machinery' -- subject(s): Direct current.
1 answer
Long hair could be caught by rotating machinery parts and drag the operator in, causing injury or even death.
1 answer
Rotating electromagnets are electromagnetic devices that produce a rotating magnetic field when an electric current passes through them. They are commonly used in electric motors and generators to convert electrical energy into mechanical energy or vice versa. The rotating magnetic field creates a torque that drives the rotation of the motor's rotor or generator's armature.
1 answer
Ad Ernst has written:
'Die Hebezeuge' -- subject(s): Electric machinery, Hoisting machinery
1 answer
Gordon R. Slemon has written:
'Solutions manual for Electric machines' -- subject(s): Electric machinery, Handbooks, manuals
'Slemon Sol Man'
'Magnetoelectric devices: transducers, transformers, and machines' -- subject(s): Electric machinery, Transducers, Electric motors, Electric transformers
1 answer
Paul C. Krause has written:
'Analysis of electric machinery and drive systems' -- subject(s): Electric driving, Electric machinery
'Electromechanical motion devices' -- subject(s): Electromechanical devices, Magnetic circuits
1 answer
A diesel electric power plant is an engine that powers electric motors. The motors actually operate the machinery such as a locomotive.
1 answer
A China supplier named Twothousand Machinery sales good quality of Electric kebab knives. Just Google China Twothousand Machinery or sign in and check from source link.
1 answer
The part that rotates inside of an electric motor is called the rotor.
3 answers
If you stick your fingers into the wrong places you can.
1 answer
Leonard R. Anderson has written:
'Electric machines and transformers' -- subject(s): Electric machinery, Electric motors, Electric transformers
1 answer
Scott N. King has written:
'Energy-efficient motors' -- subject(s): Electric Pumping machinery, Electric motors, Energy conservation, Evaluation, Municipal water supply, Pumping machinery, Electric, Water-supply engineering
1 answer
The work done in rotating an electric dipole in a uniform electric field from parallel position to anti-parallel position is zero. This is because the torque applied to rotate the dipole is perpendicular to the direction of the electric field, so the work done is zero.
1 answer
A shaft is usually longish bit of rotating machinery, made to transfer rotating power. Eccentric means off-center. Either the shaft isn't round, or it's not mounted at the center of wherever it it.
1 answer
An electric generator works by rotating a coil of wire within a magnetic field to produce an electric current through electromagnetic induction. This process converts mechanical energy into electrical energy.
2 answers
An electric generator works by rotating a wire coil within a magnetic field to produce electric current through electromagnetic induction. This process converts mechanical energy into electrical energy.
1 answer
When working with or near machinery with rotating or moving parts, wear your hair short, or secure your hair in a hat or hair net to ensure it does not get caught, drawing you into the machinery.
1 answer
Non-rotating equipment refers to machinery or components that do not have moving parts or rotating elements. These can include items like pipes, tanks, vessels, and static structures within a system or process. Non-rotating equipment plays a critical role in various industries such as oil and gas, chemical processing, and power generation.
1 answer
Static equipment refers to items that do not move, such as storage tanks or pressure vessels. On the other hand, rotating equipment includes machinery that moves or rotates during operation, such as pumps, fans, or turbines.
1 answer
Hempstead Stratton Bull has written:
'Direct-current machinery' -- subject(s): Direct current, Electric machinery
1 answer
syria imports food, livestock, metal and metal products, plastics, yarn, paper, chemical and chemical products, machinery, and electric power machinery.
1 answer
The rotating coil of a dynamo or electric motor is called armature.
1 answer
inductor
1 answer
Vehicles and vehicle parts, electric and electronic machinery and equipment.
1 answer
Vehicles and vehicle parts, electric and electronic machinery and equipment.
1 answer
Scott Hancock has written:
'Design of direct-current machines' -- subject(s): Design and construction, Direct current, Electric machinery
'D.-C. motors and generators' -- subject(s): Direct current, Electric machinery
1 answer
Joachim Raabe has written:
'Hydro power' -- subject(s): Electric machinery, Equipment and supplies, Hydraulic machinery, Hydroelectric power plants
1 answer
Walter Irvine Slichter has written:
'Principles underlying the design of electrical machinery' -- subject(s): Electric machinery, Design and construction
1 answer
Peter F. Ryff has written:
'Electrical machines and transformers' -- subject(s): Electric machinery, Electric transformers
1 answer
The GoGo battery operated scooty is No 1 scooty in India which is manufactured by JP Machinery. They optimized their electric scooty with advanced features.
1 answer
inductor
1 answer
it is done with a magnet and a rotating coil of wire
1 answer
inductor
1 answer
generator
1 answer