In telecommunication, a distributed-queue dual-bus network (DQDB) is a distributed multi-access network that (a) supports integrated communications using a dual bus and distributed queuing, (b) provides access to local or metropolitan area networks, and (c) supports connectionless data transfer, connection-oriented data transfer, and isochronous communications, such as voice communications.

IEEE 802.6 is an example of a network providing DQDB access methods.

The queue is the the concept involved in Algorithms where you use stack, queue and lists to store the different data items e.g people waiting for the bus at bus stop the first in queue will enter first this is called FIFO (first in first out).......

dual

through the pin connectors

Start with your basic bus topology, where you have a beginning and an end of the network with however many nodes connected in series between. Now, add an identical bus network, except this time start from the other bus network's end and end at this other network's beginning. That's a dual bus topology. This simply provides a single, fail-safe mechanism to the normal bus topology.

If bus means a public transport vehicle? Then the disadvantages are having to queue at a bus stop at least ten minutes before the bus is due to arrive (according to a bus timetable). Sometimes the bus will be late, or even not turn up at all - especially in the countryside were the bus may only run a few times each day.

If bus means a public transport vehicle? Then the disadvantages are having to queue at a bus stop at least ten minutes before the bus is due to arrive (according to a bus timetable). Sometimes the bus will be late, or even not turn up at all - especially in the countryside were the bus may only run a few times each day.

The backside bus is 32-bit wide and the front side bus is 64-bit wide. This because of the dual processing design.

Queue is a data structure which is based on FIFO that is first in first out. Following are the types of queue: Linear queue Circular queue Priority queue Double ended queue ( or deque )

Queues is the plural of queue.

circular queue

Dual channeling effectively doubles the speed of memory by using double the wires for the memory bus. This doubles the available bandwidth,

Ready queue contain all the jobs that are ready to execute.so the job queue and the ready queue are one and the same.

QUEUE is the first in first out (FIFO) data structure. It is a linear data structure in which insertion of an element is done from rear end of a list and deletion of an element is done from front end of a list. For example- people in queue waiting for bus.

What is linear queue

Normally just one. Additional tanks can be installed if they're specified when the bus is ordered (e.g., an activity bus which makes long trips might have dual fuel tanks).

A circular queue is similar to the normal queue with the difference that queue is circular queue ; that is pointer rear can point to beginning of the queue when it reaches at the end of the queue. A priority queue is a queue in which each element is inserted or deleted on the basis of their priority. A higher priority element is added first before any lower priority element. If in case priority of two element is same then they are added to the queue on FCFS basis (first come first serve).

The noun 'queue' is a collective noun for a 'queue of people'.

Queue or Q (as in waiting in a queue or the letter Q)

The queue is a linear data structure where operations of insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. Following are the types of queue: Linear queue Circular queue Priority queue Double ended queue ( or deque )

A circular queue is similar to the normal queue with the difference that queue is circular queue ; that is pointer rear can point to beginning of the queue when it reaches at the end of the queue. Advantage of this type of queue is that empty location let due to deletion of elements using front pointer can again be filled using rear pointer. There are 2 conditions for queue full if queue is implemented using arrays. First condition is Front = 1 and Rear = N Second condition is Front = Rear + 1

to form a waiting line is spelled 'faire la queue' or 'former une file d'attente' in French.

The homophone for "queue" is "cue."

There are two basic categories of network topologies

Physical topologies

Logical topologies

The shape of the cabling layout used to link devices is called the physical topology of the network.

Logical topology is the way the signals act in the network

In BUS topology you have "THE LINEAR BUS" and "THE DISTRIBUTED BUS"

IN the LINEAR bus all the nodes of the network are connected to a common transmission medium which has 2 end points where as in the DISTRIBUTED, all the nodes are connected to a common transmission medium which has more than 2 end points.

The queue is a linear data structure where operations of insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. A circular queue is similar to the normal queue with the difference that queue is circular queue ; that is pointer rear can point to beginning of the queue when it reaches at the end of the queue. Advantage of this type of queue is that empty location let due to deletion of elements using front pointer can again be filled using rear pointer.

Example 1: I am standing in the ATM queue

Example 2: Please be in queue

A>People will stand on queue for getting a film tickets.

B>In Airport the luggage will be flowing in a queue manner.

C>Children will walk into the school in queue.

D>Getting into the temple we have to stand in a queue.

E>School children will do the prayer with a proper queue.

A queue is a line, as standing in line to get a ticket, or standing in line to buy food.

Get back in queue, you!

Look at that queue.

I've never seen a longer queue in front of the ticket box!

The 8086/8088 instruction queue is a buffer that holds opcode bytes that have been prefetched by the bus interface unit. This speeds up operations of the processor by helping to reduce fetch latency, i.e. to improve the probability that an opcode byte fetched by the processor is already available.

the barber's favorite braid is the queue

Queue Magazine was created in 2007.

The Queue - novel - was created in 1983.

Jumping the Queue was created in 1983.

if the queue contains one element then front end is equal to the rear end.

In distributed scheduling, load is related to the task size. Here, task can simply be a request for web page. tasks are in time units i.e. their size is based on how much time they need to get process. so the load can be stated as the number of time units are there at a moment in the queue of dispatcher.

A circular queue uses the same conventions as that of linear queue. Using Front will always point one position counterclockwise from the first element in the queue.

Ascending priority queue is a collection of items which can be inserted aurbitarly and which can be removed smallest item. Descending priority queue is similar to ascending priority queue but it allows the deletion of the largest item.

The 8086/8088 instruction queue is a buffer that holds opcode bytes that have been prefetched by the bus interface unit. This speed up operations of the processor by helping to reduce fetches latency, i.e. to improve the probability that an opcode byte fetched by the processor is already available.

This works best when there is no branching, as a branch would invalidate the queue. Advanced processors attempt to "predict" the branch, making the probability even better.

The queue is a linear data structure where operations of insertion and deletion are performed at separate ends also known as front and rear. Queue is a FIFO structure that is first in first out. A circular queue is similar to the normal queue with the difference that queue is circular queue ; that is pointer rear can point to beginning of the queue when it reaches at the end of the queue. Advantage of this type of queue is that empty location let due to deletion of elements using front pointer can again be filled using rear pointer. A double ended queue (or deque ) is a queue where insertion and deletion can be performed at both end that is front pointer can be used for insertion (apart from its usual operation i.e. deletion) and rear pointer can be used for deletion (apart from its usual operation i.e. insertion)

Simple queue is a linear queue having front & rear var to insert & delete elements from the list.But there is a boundary that we have to insert at rear & have delete from front.For this reason instead of having space in the queue if there is a single element in the rear,the queue is full.the other space is wasted.
To utilize space properly,circular queue is derived.In this queue the elements are inserted in circular manner.So that no space is wasted at all.

Between 40 and 150 pounds depending on what size of tire and if they're dual chains.

A data bus is used to transfer data.

In Computer Information Systems in school (Dual-Enrolled)

Where there is an electrical connection required from one feeder to many feeder , then you need a reference or grid from where the loads can be distributed.

queue of 8086 microprocessor is 6 bits

Maybe you mean the prefetch queue?

Queue = line (of people)

A Place in the Queue was created in 2005-08.

The Queue - novel - has 280 pages.