The printer driver resides on the computer. It is the software that tells the computer how to talk to the printer.

Someone can attach a network printer to a standalone computer by using a USB connection. Using a cord to attach the printer to the computer, then installing the printer software, someone can then use the printer from the computer.

Printer will not print from computer if:

1. The printer is not connected to computer

2. The printer Driver is not installed on the computer

3. The printer Driver is not compatible with the Operating System on your computer

There are a whole lot of other possibilities please be specific with the problem scenario

the printer is connected to the computer but when I go into my computer and go to add or remove it shows that it is locked out

It is known as a local printer, as opposed to a network printer, which is a printer connected to a network.

a local printer

Is the printer buffer in the printer or in the computer?

The main advantage for using the print server is you dont have to connect your printer to a computer and share the printer on that computer (printer shared computer). To be more specific, it means you dont need printer shared computer anymore and can use that computer for other purposes.

2Gb with a computer

A network printer is shared by more than one computer. A local printer is directly connected to one computer. But the printer can be set up as a local or a network printer.

just go to the printer driver right click on it, select the properties in that go sharing tab on the top side in that select share this printer & apply it after that go to the any computer on the same network in that go to the printer tab in that add printer option select the network printer option in that select browse the printer & select that printer it get install on your computer OR go to run tab on any same network computer just put \\IPAdd. of the computer on which printer is get installed then press ok after there is a tab where printer option is there just select that printer & right click on it and select Connect the printer is get install on your computer OR go to the my network places select the computer on which printer is installed open it select that printer & right click on it and select Connect the printer is get install on your computer

your printer can be connected to the computer in two ways.

1. the printer can be connected by a usb (universal serial bus) cable to the computer.

2. the computer can also transmit data via a network.

To check whether a printer is shared or not go to devices on the computer and note whether the printer is listed for that particular computer. Do this for each computer in question.

one is the HP printer

The default printer.

A USB printer is connected to a computer or network by a USB cable - so the answer is "No!"

A printer may be used by anyone. A personal computer is typically connected to the printer. The drivers for the printer must be installed on the computer. The user must give a print command.

Printer drivers - are small programs that enable the operating software (eg Windows) to recognise that the printer is attached to the computer. They literally allow the printer and computer to 'talk' to each other.

You will want to have the printer power cord plugged into the wall, and have the printer powered on. Do not connect the printer to your computer yet. Insert the ink cartridges into the printer, if thery're not already, and let the printer calibrate them. Run the setup software, and when prompted, connect the printer to your computer. DO NOT connect the printer to your computer until the setup software tells you to!

The first computer printer was created by Remington Rand in 1953 that was to be used with the Univac computer.

Network printing works like normal printing as far as your document is concerned, but the computer does a little more work. Normally, the computer sends the document to a printer physically plugged in to it and it prints. In this case, the printer isn't plugged in, but is instead on the network, usually connected another computer. The computer printing would send the data over the network to the computer hosting the printer as if the printer were plugged in to the local machine.

remote printer is these printer we can connect to many computer by using wireless comunication is called remote printer

Any USB printer will be easy to install and use on your Dell computer.

printer (computer device) = la impresora

The interface between a computer and printer in which computer sends multiple bits signal to the printer.

If you're talking about setting up a printer on the computer then the use for that is to connect the printer to your computer so you are able to print. The computer will send "test" pages to print on your printer so you will know whether it works or not.

Install the printer on one of the computers. Then do the printer install wizard on the other computers, and choose a network printer, and browse to the computer with the printer installed and select that printer, and have the main computer automatically install drivers on the other computers. Configure outlook express however you want. Google it for detailed instructions.

Output

- information goes out from computer to printer

Computer ink is the ink for your printer. When your printer is connected to your computer, it monitors how much ink you have left. All you need to is buy more.

hgi

No

Sharing a printer is performed from the computer the printer is directly attached to (ie. via USB).

A local printer is one that is connected directly to an end user's desktop or laptop computer, and is usually used exclusively by that one end user. This is in contrast to a networked printer, which can be accessed and used by multiple people on the same network that the printer is attached to.

A USB printer is, quite simply, any printer that connects to a computer using the USB interface.

yes if you are performing actions with an infected computer, as loong as you share the same printer your computer will not become infect.

The printer is a peripheral device to the computer. To a certain extent it can also be classed as a back-up device.

To take a printout from a computer simply connect your printer and then select the printer and then click on the print icon.

Probably because your printer is out of ink or your printer is broken or your computer is broken an maybe your f***ed in the head

Yes. However, this does not mean that your printer will be supported out of the box.

Yes because it is upgradable. yOU NEED TO SHARE THE PRINTER.

Most computers today have several Universal Serial Bus inputs, and each one is capable of supporting a different printer. However, the printer drivers must be installed on the computer, so that the computer can communicate with the printer. These drivers are contained in the installation disc which comes with the printer, or can be downloaded from the manufacturers website. Older computers had a parallel port to drive printers, and could only operate one printer.

A 'shared' printer is one which is accessible from the local are network, which allows a user on a computer which is not directly connected to the printer to use that printer.

It sounds like you need software drivers.

I would Check the printer manufacturers website in the support section.

Usually the driver install is pretty straight forward and identifies your printer automatically during the process.

A computer printer is typically measured in kilograms due to its heavier weight. The weight of a printer can vary depending on the size and model, but it is usually more practical to use kilograms for measurement.

Printer firmware is a program inside a printer, that allows it to receive data from a computer and so print on paper.

Connect the printer to a network computer that is connected via a wireless router. If that doesn't work, use the built in WiFi connection and tell the computer to look for it and add it is a separate printer, then set it as the default printer.

it prints stuff that come from the computer

To print documents off of a computer...

What is often called a printer is simply an output device. The computer communicates with the firmware called printer drivers in the computer. The driver makes the connection with the printing output device.

Information that is processed by the computer and transmitted to a monitor or printer is called output.

You have to connect the printer to computer which has either wireless card or computer connected to the wireless router with a cable. After that connect the printer to the computer and go in printer settings. The one you need is sharing. Choose "Sharing", and add users allowed to send print jobs.

output