Two types of commutation process
1) Natural commutation
2) Forced commutation
1 answer
Generally there are two methods of improving Commutation :-
1.Resistance Commutation
2.Emf or Voltage Commutation
The Commutation can also be improve by using interpoles and compensating windings.
1 answer
the process of turning off of a thyrisror is known as commutation
1 answer
Voltage commutation: This is possible in ac circuits...The thyristor gets turned off by reverse bias (negative half cycle) voltage applied across it. This is also called line commutation.
Current Commutation: This is possible in dc circuits ...This type of commutation makes use of auxiliary circuit which contains inductor,capacitor,diode and even a thyristor(auxiliary). This is called Forced commutation.
1 answer
phase controlled RECTIFIER circuit used Natural Commutation......
1 answer
1.resistance commutation 2.e.m.f commutation
3 answers
it is the natural commutation ...by making open circuit or short circuit on the thyristor to make it turn off.
1 answer
last pay drawn meaning? what is basic pension is it pension before commutation or after commutation?
1 answer
The power of commutation is a power only given to the president of the United States and is the power to commute (reduce) the length of a sentence or a fine by a court.
1 answer
The purpose of commutation is to switch the direction of current flowing through a motor's windings, thereby controlling the motor's rotation. Commutation ensures that the armature's magnetic field is always in the correct alignment with the stator's magnetic field, enabling smooth and continuous motor operation.
1 answer
i think i know this answer...line commutation is the commutation in single phase inverters/converters when there is current flow back to the source..
It can also refer to a method of turning of a semiconductor device known as a Thyristor or SCR, sometimes called natural commutation. In this method the current between the anode and cathode is interrupted or dropped to a point where the Thyristor can no longer maintain its latch or keep conducting, shutting the device off.
1 answer
a Heumann chopper is nothing but the Class D commutation of a thyristor.
refer to the following link on class d commutation
http://www.slideshare.net/prathikm/thyristor-commutation-techniques
1 answer
In voltage commutation process, the introduction of interpoles between main poles compensate armature mmf and reduces the effect of armature reaction.
1 answer
Copper carbon decides the distribution of commutation from the rotation. It tells what direction for it flow.
1 answer
Commutation in a rectifier: Refers to the process of transfer of current from one device (diode or thyristor) to the other in a rectifier. The device from which the current is transferred is called the "out going device" and the device to which the current is transferred is called the "incoming device". The incoming device turns on at the beginning of commutation while the out going device turns off at the end of commutation.
Commutation failure: Refers to the situation where the out going device fails to turn off at the end of commutation and continues to conduct current.
1 answer
The theme of this painting is about commutation and learning.
2 answers
to the commutation and had to have a education to work and or have a job
1 answer
A release from sentence is called a commutation. It's not a pardon where the sentence itself is nullified. A commutation of sentence still maintains that the individual is guilty, but has been deemed to have been redeemed in the eyes of the law.
1 answer
Commutation
1 answer
its the change or reversal of the direction of current by the combination of brush and coil.
1 answer
Commutation Capacitors are usually switched in parallel to the thyristors.
1 answer
A commutation process typically refers to the reduction of a legal penalty or sentence. This could involve changing a prison sentence to a lesser punishment or reducing the severity of a punishment for a crime. It is often granted by a higher authority, such as a governor or president.
1 answer
In Pennsylvania, a person serving a LIFE sentence is not eligible for parole. The only way a lifer can be released from prison in PA is to (1) have his conviction overturned; (2) receive a commutation of his sentence from the Governor of Pennsylvania; or (3) die in prison.
It should be noted that obtaining a commutation of a life sentence in PA is very difficult. The Governor of Pennsylvania can only grant a commutation of a life sentence after the inmate's petition for a commutation has met with the unanimous approval of the Pennsylvania Board of Pardons. There are 5 members that serve on the PA Board of Pardons. If even one member votes against a lifer's commutation petition, the Governor cannot legally grant that commutation.
3 answers
NATURAL COMMUTATION:
Commutation of current from one switching device to another in a power electronics converter at the instant the incoming voltage has a higher potential than that of the outgoing wave, without the aid of any commutation circuitry.
1 answer
chopper transforms ac to dc (dc chopper) while all inverter transform dc to ac
commutation used in chopper: forced,load
commutation used in inverter:forced(180 vsi),natural or line(120 vsi)
1 answer
ARPENET is what evolved into the internet.ARPENET made technologies of commutation by packets which has to form bases it now Internet.
1 answer
formal commutation is show the Accurate Information With Sophisticated Language
1 answer
An anticommutator is a function of two elements A and B, defined as AB + BA.
2 answers
Yes, the governor has the power to pardon, commute or suspend sentences.
2 answers
Francisco A. Guillen has written:
'DC-side single commutation inverter'
1 answer
It is not true that all men had to fight.
ALL men (whether poor or wealthy) had three main options, and one special option:
These options had been in place from the 1700s.
1 answer
William Baxter has written:
'Commutator construction' -- subject(s): Commutation (Electricity)
1 answer
Auxiliary switches are separate switches with circuit which helps for the function of commutation of main switches of a converter.
1 answer
A commutation switch is a device used to reverse the direction of current flow in a circuit, typically in motor control applications to control the direction of rotation. It allows for the smooth transition of current between different circuit elements, such as switching from one winding to another in a motor to maintain torque.
1 answer
Auxiliary switches are separate switches with circuit which helps for the function of commutation of main switches of a converter.
1 answer
1 answer
Amnesty, Pardon, Parole, or the Commutation of their sentence.
3 answers
*If* 5x + 10 is *the same as* 10x +5, you can apply commutation and association.
If they are *not* the same, you cannot apply commutation and association.
To be clear, commutation and association are mathematical rules that allow you to simplify equations/ formulae/ expressions.
But the simplification *must* give the same result as the original.
Example 3 + 7 + 4 + 5 + 1. Association lets you say this is the same as:
(3+7) + (4+5+1), which works out to (10) + (10), = 20.
1 answer
it is one of method to turn off scr. resonating LC component is used to turn off scr
1 answer
L. J. Berman has written:
'A classification of thyristor commutation circuits for static invertors'
1 answer
it does so...as because of commutation process.
bcoz......in dc current we cant avoid sparking and hence it uses ac supply....
so that i changes its direction in up nd down motion just like a sine wave..so commutation procees occurs..and it avoids sparking..........
hence ac is preferd
1 answer
The French Horn was invented in 1753, it was invented because it was used for commutation and for the beautiful sound it made.
2 answers