An aqueous phase is a homogenous part of a heterogenous system which consists of water or a solution in water of a substance.
1 answer
An aqueous solubility is an equilibrium partitioning of a compound between its pure phase and water.
1 answer
is it possible to have an inversion of the two phases during extraction step of DNA, with the organic phase located on the top the aqueous phase
1 answer
Yes, surfactants such as sodium lauryl sulfate are compounds that are soluble in both water and the aqueous phase. This is because surfactants have both hydrophilic (water-attracting) and hydrophobic (water-repelling) parts in their molecular structure, allowing them to interact with both water and non-polar substances.
2 answers
An aqueous solubility is an equilibrium partitioning of a compound between its pure phase and water.
1 answer
Water. H2O
1 answer
The partition coefficient value provides information on how a compound distributes between two immiscible phases, typically between a water phase and an organic phase. A higher partition coefficient value suggests higher solubility of the compound in the organic phase relative to the water phase, indicating greater hydrophobicity and potential difficulty in aqueous solubility. On the other hand, a lower partition coefficient value suggests higher solubility in the aqueous phase relative to the organic phase.
2 answers
Yes, an aqueous solution of copper sulfate is a homogeneous mixture because it consists of a single phase where the copper sulfate is uniformly dissolved in water, resulting in a uniform composition throughout the solution.
2 answers
Chloroform is used in the CTAB method for DNA extraction to separate cellular components by creating phase separation. It helps in lysing the cell membrane and denaturing proteins, allowing the DNA to be extracted into the aqueous phase while other cellular components remain in the organic phase. Chloroform also aids in removing lipids and other contaminants from the DNA sample.
2 answers
The four phase symbols in chemistry are (s) for solid, (l) for liquid, (g) for gas, and (aq) for aqueous (dissolved in water). These symbols are used to indicate the physical state of a substance in a chemical reaction or process.
2 answers
Chloroform is typically used in DNA extraction procedures to separate the aqueous and organic phases during the process of phenol-chloroform extraction. It helps in removing proteins, lipids, and other contaminants from the DNA solution by partitioning them into the organic phase, allowing for the isolation of pure DNA in the aqueous phase.
1 answer
Chloroform is used in DNA extraction to separate the DNA-containing aqueous phase from proteins, cell debris, and other contaminants. It acts as an organic solvent to partition the DNA into the aqueous phase, enabling its isolation. However, chloroform is toxic and can be hazardous, so proper safety precautions should be followed when handling it.
1 answer
Chloroform is used in RNA extraction to separate RNA from other cellular components based on differences in solubility. It helps in the denaturation of proteins and disruption of lipid membranes, allowing for the separation of RNA from DNA and proteins in the sample. By forming a distinct phase, chloroform enables the isolation of RNA in the aqueous phase for downstream analysis.
2 answers
A homogeneous reaction is one in which all reactants and products are in the same phase (e.g., gas, liquid, or solid). This type of reaction is characterized by uniform concentration and temperature throughout the reaction mixture. Examples include aqueous reactions in liquid phase and combustion reactions in gas phase.
2 answers
Solutions in which water is the solvent are called aqueous solutions.
8 answers
Boris Y. Zaslavsky has written:
'Aqueous two-phase partitioning' -- subject(s): Liquid chromatography, Separation, Biomolecules
1 answer
One necessary condition for extracting a substance from an aqueous solution is to use a solvent that the substance is soluble in, but the solvent itself is not miscible with water. This allows for the transfer of the substance from the aqueous phase to the organic phase. Additionally, the pH of the solution may need to be adjusted to optimize the extraction process.
2 answers
Yes, ethanol can be used in extraction with water. This process is known as a liquid-liquid extraction or partitioning. Ethanol can help solubilize certain compounds that are not soluble in water, allowing for the extraction of a wider range of compounds from the sample.
3 answers
The mobile phase as indicated is the moving phase. Either the mobile or stationary phase is polar and the other is Non-polar. A common polar phase is Methanol, and non-polar is hexane
6 answers
the difference between a solution and a non solution is that a solution is a substance in which all the particals in it have dissolved and mixed completely. a non solution is a substance that still has particals that have not been mixed completely.
6 answers
An aqueous solution is brine; but aqueous solutions are not attracted by anions.
1 answer
'An Aqueous' solution.
NB The word 'aqueous' comes from Latin ; 'aqua' meaning 'water'.
4 answers
Marcel Jean Nestor Pourbaix has written:
'Atlas of electrochemical equilibria in aqueous solutions' -- subject(s): Phase diagrams, Electrochemistry
1 answer
The term for a solution made in water is an aqueous solution.
3 answers
Enzyme-catalyzed reactions are examples of homogeneous catalysis, as the enzyme and the reactants are in the same phase (usually liquid phase) during the reaction.
2 answers
Hydrochloric acid (HCl) is added in liquid-liquid extraction to convert the ionic form of an organic compound into its non-ionic form, making it more soluble in the organic solvent. This aids in the separation of the compound from the aqueous phase into the organic phase, improving the efficiency of the extraction process.
2 answers
The liquid in an aqueous solution is water. Aqueous solutions are solutions in which water is the solvent, meaning it is the substance in which other molecules or ions are dissolved.
3 answers
The aqueous solvent is water in a solution. An aqueous solution is a mixture that consists of the solvent water and a substance called a solute. For example, by dissolving the solute sugar in water, you get an aqueous solution.
1 answer
Ag3PO4 is a solid compound. It is not soluble in water, so it exists as a solid in aqueous solutions.
2 answers
Yes, zinc sulfate can be dissolved in water to form an aqueous solution.
2 answers
Mallika Das has written:
'Associative properties and phase behaviour of aqueous solutions of poly(oxyethylene)-b-poly(oxypropylene)-b-poly(oxybutyene) triblock copolymers'
1 answer
A solution with solvent as water is known as aqueous solution while a sloution with solvent not as a water is called non-aqueous solution.
Arhum Adnan
1 answer
Yes, chemical equations can include the phase of each substance by indicating whether a substance is a solid (s), liquid (l), gas (g), or aqueous solution (aq). This additional information helps to provide a more accurate representation of the reaction conditions.
1 answer
Aqueous chlorine will react with aqueous sodium iodide to form aqueous sodium chloride and iodine. The balanced chemical equation for this reaction is: Cl2 (aq) + 2NaI (aq) -> 2NaCl (aq) + I2 (s)
2 answers
Aqueous solutions are solutions where water is the solvent, while non-aqueous solutions are solutions where the solvent is not water. Aqueous solutions are more common and have unique properties due to the presence of water. Non-aqueous solutions can use solvents like acetone, ethanol, or toluene, and are often used in specialized applications.
2 answers
an aqueous solution is a solution made of water.
1 answer
In an aqueous solution the solvent is water.
1 answer
The formula for aqueous hydrogen sulfate is H2SO4.
1 answer
Aqueous titration involves using a water-based solvent for both the titrant and the analyte, while non-aqueous titration involves using a solvent other than water. Aqueous titrations are more common and are used for analyzing compounds that are soluble in water, while non-aqueous titrations are used when water may interfere with the reaction or when the compounds are not soluble in water.
2 answers
In solution, the sugar is no longer in a state of solidity or fluidity. once dissolved, it is divided into charged particles or smaller mollecules, which are attracted to either the positive or negative poles of the water molecules. The sugar molecules are therefore aqueous, not solid, liquid or gas.
1 answer