0
Lego is made out of plastic for a variety of reasons. Here are some:
1. Plastic is cheap, and easy to mould.
2. Plastic is safe in the aspect that you can't get harmed by it (unless you eat it).
3. Plastic can be reused and is damage-proof.
7 answers
It's usually ABS. Most commercial products are made with ABS plastic.
1 answer
ABS plastic is known for its strength and durability, making it resistant to breaking easily.
1 answer
No, ABS plastic does not contain bisphenol-A. ABS plastic is a polymer made from acrylonitrile, butadiene, and styrene, and does not use bisphenol-A in its composition. ABS is commonly used in the manufacture of a variety of consumer products such as toys, electronic housings, and automotive parts.
3 answers
To effectively weld ABS plastic materials together, you can use a technique called solvent welding. This involves using a solvent that softens the ABS plastic, allowing the two pieces to bond together when pressed. Make sure to use the appropriate solvent for ABS plastic and follow safety precautions when working with chemicals.
1 answer
Plastic chairs are often made out of PVC (polyvinyl chloride).
3 answers
No. ABS is safe for potable water.
1 answer
Plastic hairdryers are typically made of a type of plastic called ABS (Acrylonitrile Butadiene Styrene). ABS is commonly used for its lightweight, impact resistance, and heat resistance properties, making it suitable for manufacturing hairdryers.
2 answers
Fiberglass is generally stronger and more rigid than ABS plastic due to its composition of fine glass fibers embedded in a polymer matrix. ABS plastic is a thermoplastic with good impact resistance, but may not be as strong or durable as fiberglass in certain applications.
2 answers
Black plastic pipe is ABS -Use yellow ABS cement. -I don't understand "grey bard fitting" -Take this to your plumbing store and they will advise.Black plastic pipe is ABS -Use yellow ABS cement. -I don't understand "grey bard fitting" -Take this to your plumbing store and they will advise.
1 answer
When searching for ABS plastic sheet suppliers, Ahmedabad and Gujarat stand out as key regions in India. ABS plastic sheet exporters in Ahmedabad and ABS plastic sheet 4x8 manufacturers in Gujarat have earned a reputation for producing high-quality products. These regions are home to several manufacturers and exporters who adhere to international standards and provide customized solutions for different industrial applications.
1 answer
Acrylonitrile Butadiene Styrene (ABS) pipe is a black plastic pipe often used for sewage pipe.
1 answer
To effectively weld ABS plastic, you can use a plastic welding kit with a hot air gun or a soldering iron specifically designed for plastics. Heat the ABS plastic pieces to be joined until they soften, then press them together firmly to create a strong bond. It is important to practice proper technique and use the right tools to achieve a successful weld.
1 answer
If the ABS you refer to is part of the fuse list eg Heater, Indicaters, Headlights then ABS stands for Anti Lock Breaking System.
If its moulded in the the plastic cover then it stantd for the type of plastic the cover is mad from, Acrylonitrile Butadiene Styrene
1 answer
you can if you want to... it would be best if you don't though. The ABS plastic nails should come with shine, if not, you could add a thin layer of top coat.
1 answer
Generally from ABS (Acrylonitrile butadiene styrene)
3 answers
Yes, ABS plastic can be recycled and many industrial locations will buy ABS plastic for a variety of purposes, contact local industrial facilities for details.
1 answer
Black plastic pipe is ABS. What is'gray bard'. Try ABS yellow cement ( from pluming supply store). -Show them 'gray bard', they will advise you.
1 answer
computer keyboards are made from ABS (Acrylo-nitrile-butadiene-styrene) plastic
1 answer
The ak's
gears are not metal, but they aren't plastic, they are a hard plastic better than abs.
1 answer
ABS Plastics easily recyclable, but this can be severely limited by additives to the plastic such as flame retardants.
1 answer
118 with steel abs clip and 151 with a plastic abs clip.
1 answer
To effectively use ABS solvent welding to join plastic components together, first ensure the surfaces to be joined are clean and free of debris. Apply the ABS solvent to both surfaces, then press them together firmly. Allow time for the solvent to bond the plastic components together securely.
1 answer
It is any of a class of plastics based on acrylonitrile-butadiene-styrenecopolymers.
1 answer
ABS plastic is not naturally UV-resistant and can degrade when exposed to sunlight over time. To improve its resistance to sunlight, additives such as UV stabilizers can be incorporated during the manufacturing process. It is recommended to use UV-resistant coatings or paint to protect ABS plastic if it will be exposed to sunlight for extended periods.
5 answers
To clean ABS plastic effectively, use a mild soap and water solution. Gently scrub the surface with a soft cloth or sponge, then rinse with clean water and dry thoroughly. Avoid using harsh chemicals or abrasive cleaners, as they can damage the plastic.
1 answer
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
You use the ABS function. So you could have something like this:
=ABS(-3)
That will obviously give you 3. You would be more likely to have a cell reference, so the -3 could be in cell D8, which would leave the formula as being:
=ABS(D8)
2 answers
At well assorted hardware stores, building supermarkets ...
1 answer
Legos first used cellulose acetate. Then, they switched to ABS plastic.
1 answer
Electroplating on ABS plastic involves using a conductive coating to make the plastic surface receptive to the electroplating process. This conductive coating is typically a layer of nickel or copper that is applied to the ABS surface before electroplating with the desired metal finish, such as chrome or gold. Proper preparation and adhesion of the conductive layer are crucial for achieving a durable and high-quality electroplated finish on ABS plastic.
2 answers
