Frequency-division multiplexing, wavelength-division multiplexing, and time-division multiplexing.
2 answers
Frequency-division multiplexing and wavelength-division multiplexing
1 answer
What is multiplexing and its diagram
1 answer
application of multiplexing in data communication
1 answer
what is function of amplitude division multiplexing
1 answer
In analog transmission, signals are commonly multiplexed using frequency-division multiplexing (FDM)
2 answers
Downward multiplexing refers to distributing a single signal across multiple channels.
1 answer
Multiplexing is the process of combining multiple signals over one media line. There are several types of multiplexing: frequency division, time division, and wavelength division.
1 answer
multiplexing refeers to the transmission of different signals in the same channel simultaneously. There are many forms of multiplexing that can be used, including frequency division multiplexing(FDM) where individual signals are transmitted over adjacent , non overlapping frequency bands. they are transmitted in parallel and simultaneously in time. In time division multiplexing(TDM) each signal is allowd to use the whole bandwidth for a certain period of time. Multiplexing is needed so that the available channel can be used efficiently and also to save costs. There is too much to know about multiplexing, here is just a short overview. One thing that one has to know is multiple access.
1 answer
Multiplexing techniques vary widely based on what is being multiplexed. Modern telecommunications use a very wide array of techniques including:
TDM - examples: TDMA, T-carrier
FDM - examples: DWDM
Spatial - example: MIMO
Code division - examples: CDMA
Phase or polarization division - cable/satellite TV
Statistcal - examples: packet mode (STS), FHSS etc etc.
This is far from a complete list. I think the question needs to be more specific.
3 answers
Does Cable television use time-division multiplexing
2 answers
Orthogonal frequency division multiplexing is special case of frequency division multiplexing where a ling serial data streams are divided into parallel data streams and each data stream is multiplied either by orthogonal frequency or code. when multiplied by code known as frequency code division multiplexing and when multiplied by orthogonal frequency then know as orthogonal frequency division multiplexing
1 answer
WDM (wavelength division multiplexing)
3 answers
Multiplexing-Combining all the inputs into one output.
Switching-Taking one input to the output, at a time/frequency
1 answer
http://zone.ni.com/devzone/cda/ph/p/id/269
1 answer
This process is called multiplexing. Multiplexing allows multiple signals to be combined into a single transmission medium in order to optimize bandwidth usage and facilitate efficient communication.
2 answers
If you have less no of data than the no of bits of data or address to b transfer Multiplexing mean to manage given busses in such a way that data or address can be transferred perfectly
1 answer
2 answers
SONET uses an inverse multiplexing technique called virtual concatenation. SONET, which is the standard used in the United States and most of Europe, stands for Synchronous Optical Network.
1 answer
Jun Zheng has written:
'Optical WDM networks' -- subject(s): Fiber optics, Multiplexing, Optical communications, Routers (Computer networks), Wavelength division multiplexing
1 answer
... packet-switching networks.
1 answer
error correction
data compression
1 answer
Approximately 14 Tera bits per second over 160 Km using wavelength division multiplexing and rising every year as multiplexing techniques develop.
1 answer
Andrea Borella has written:
'Wavelength division multiple access optical networks' -- subject(s): Multiplexing, Wave length, Congresses, Wavelength division multiplexing, Light, Optical communications
1 answer
Frequency division multiplexing is when a communication medium divides its frequency in order to carry a number of different signals at once. Broadband DSL uses this to transport large amounts of data quickly.
1 answer
If only one network address is available on a host, all transport connections on that machine have to use it. When a TPDU comes in, some way is needed to tell which process to give it to. This situation, called upward multiplexing. While if a user needs more bandwidth than one virtual circuit can provide, a way out is to open multiple network connections and distribute the traffic among them on a round-robin basis. This modus operandi is called downward multiplexing.
2 answers
Multiplexing
1 answer
Multiplexing
1 answer
color
1 answer
Guard bands between channels
1 answer