0
To delete an incorrect character in a document, simply click next to the incorrect character and then press BACKSPACE to erase to the left of the insertion point. You can also click next to the incorrect character and click DELETE to erase to the right of the insertion point.
2 answers
If you need to select the entire document, you can do so with the mouse by following these steps:
- Move the mouse pointer to the left of the paragraphs in your document. The pointer changes to an arrow pointing up and to the right.
- Hold down the Ctrl key.
- Click the left mouse button.
Another way to do this is to simply triple-click the left mouse button after step 1.
2 answers
Right click the picture with your mouse. Go to the option copy and click it. On the word document go to edit at the top left. Click paste.
1 answer
Duplicate Document Check
1 answer
Duplicate Document Check
1 answer
Click on the document that Sarah left and move the mouse behind it. there is another document of " the jersey devil" that is the other document.
1 answer
Ctrl+P , target your printer with a left mouse click and click the button Preferences to change all printing settings for your document, including enlarging.
1 answer
if you are talking about a word document in a computer, you just need to click the mouse to the part where you are adding space then hit either enter or spacebar
1 answer
Move the cursor over your monster and right click (click the button on the mouse that's next to the button you normally click).
1 answer
Open the control panel on your computer (on my computer for example, it comes up when I click start in the lower left hand corner of the screen). Next click on "mouse" or "mouse properties." There should be a tab for "pointers" that you can click on -- then choose the pointer you want.
1 answer
Right-click on the taskbar (the bar which the start button is part of) and if there is a tick next to "Lock the taskbar", click on it. Next, move the mouse over an empty part of the taskbar, hold down the left mouse button and drag it down to the bottom ofthe screen by moving your mouse. Release the mouse button when the taskbar is where you want it to be Alex
1 answer
Highlight it with your mouse, right click, select "COPY" then open up Word 2003 and then with a blank piece of paper in front of you, right click and select "PASTE"
1 answer
control key with holding arrow
left click mouse and hold
1 answer
A single click on an Apple Macintosh computer consists of one up and down motion on a mouse. A double-click would consist of two consecutive single clicks with no or very little time between the clicks. (It is important to note that the speed of the "double-click" can be adjusted as long as a mouse is connected to the computer.)
Also, usually, a single click selects an object or icon. A double-click usually opens or launches an application or document. (This is the case when your computer is in the "Finder." You can tell you are in the "Finder" when you see the word next to the Apple icon in top left corner of your monitor/screen.)
All this can become confusing due to some "directions" telling the user to "click and hold." The "click and hold" means to move the mouse arrow over the object, click down on the mouse but do not finish "clicking" by letting go for the up motion of a full click, it is essentially a "half-click." This action usually causes the mouse arrow to "grab" or "hold" the object or icon.
2 answers
simple write what you are doing and then depending on what version click file and click save.then call your document a name and click save next to it
1 answer
Backspace
1 answer
just walk in and there you go just get your mouse click on the button next to the sparkle studios
1 answer
keep the mouse on level 1 and next to reset you will see unlock everything click it
1 answer
You can save your Microsoft works document in "saved as" to be a Microsoft word document. All you do is have to go to "File" the go to "Save As" then go to "Save as type" and then click the down arrow next to the "Save as type" and click "word 97-2003 Document (*.doc)" or click "word 2007 Document (*.docx). This should work. I would save it as the word 97-2003 Document (*doc).
Hope this helps,
Waveracer200
1 answer
To be able to copy and add a url of a web site, you need to high light the url and then click on the copy and come to the page where you want to paste and then right click on the mouse and click on paste.
1 answer
1. Position your mouse over the image, click your right mouse button, then select "Save Image as ..." or "Save Picture as ..." from the dropdown menu. Indicate where you want the image to be saved.
2. Open your PowerPoint document. Click Insert Picture. Locate the picture in the directory where you saved it, double click it or hit insert, and voila! it'll appear in your PowerPoint document. Note: the picture is only animated during a slideshow.
1 answer
To use the print screen application on a computer, go to the page or picture that you want to take a snapshot of. Click on the image, then strike the key on your keyboard that is identified as "Print Screen" or "Prt Scrn". Next, open up a Word document, right click your mouse and select paste. The image you just clicked on will be replicated.
1 answer
next to the log out sign on the top of the screen is the help button. mouse over that and click the breeders manual
1 answer
go to the internet put your mouse on the thing you want to erase and then next to it click on the x and then it erased
1 answer
Right Click, Left Click, Mouse Wheel, and Moving the mouse.
I hope thats the answer you were looking for.
7 answers
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
Save and close the document. Do it from Windows Explorer. Find the document and right click on it and you can rename it.
4 answers
Click on the File menu after opening the html document in the browser. Then click on Print Preview. After adjusting margins, click on Print to print the document
1 answer
Move the mouse over the comment and click the arrow next to "reply" then click remove. You can only remove comments that you made or that other people made on your videos.
1 answer
Quoting crankthatspiderman95
first you click on the cork screw, then click on the pain reliver gell, next click the mouse curser to the body (i would not do it on any organs), after when the circle thing comes put your mouse on the red thing and stay in it until you made 1 orbit around.
1 answer
Click on blank document to make a new document. If you already have a document open and want to create a new document click file, new, blank document.
1 answer
click... when you press the left mouse button (and release it) it's a left-click and when you press the right mouse button (and release it) it's a right-click
3 answers
You can simply right-click on a corner of the trackpad (one-finger), or with two fingers, anywhere on the trackpad. If you're using a mouse (either the Mighty Mouse or Magic Mouse), go to the upper right of the mouse and click.
2 answers
Right-click means press the right mouse button. Left-click means press the left mouse button.
1 answer
If you mean how do you upload a document:
You move your cursor to 'Publish' and click 'Document manager (upload)'
Then you go to the box labelled 'upload new document.'
Go to 'File on computer' and click the button next to it. Search for your document and click 'ok.' Now you only have to give your document a name in the 'label' box and you're done!
2 answers
At the bottom of your game screen there will be an icon with a house, next to it will be a map. Click on the map and move your mouse on the places and find the Sky Nightclub, click on it and you will be outside the Sky Nightclub. Click on the door to enter the sky nightclub.
1 answer
The computer recognizes the click by monitoring the state of the physical button built into the mouse (or trackpad or similar device). When the button is activated (pressed), the operating system is notified of this fact.
In the next step, the operating system needs to identify the X and Y coordinates on the screen (and, in case of a multi-screen system, the screen number S) to which the click applies. This is pretty simple: the operating system draws the mouse cursor, so it knows its location at any time. Thus, the location of the mouse cursor at the time of the click allow the computer to recognize the mouse click event.
In the next step, the operating system needs to work along the visual items in viewing order to identify which window and which control (button, text area, icon, etc) was hit by this event. Following is a series of software notifications to the affected applications, windows and controls, allowing those to respond to the mouse click as appropriate.
1 answer
Click drag means moving your pointer over an icon and then clicking on it. Then, without unclicking, moving the mouse to where you want to drop the icon. And then unclick. Double click means moving you pointer over an icon and quickly push the left mouse click button two times. Right click just means clicking the right mouse click button. This might be referring to right clicking on an icon. In which case you should hover the mouse pointer over the icon and then push the right mouse button.
1 answer
First of all, you are the one who double clicks your mouse. If you are talking about why the mouse makes two clicking sounds when you click it once, that is because it makes one click sound when you depress the mouse button, and it makes another when you lift it up again.
1 answer
=>On the View tab, click Arrange and then click Split.
If the window is wide enough, Word displays Split directly on the View tab.
=> To adjust the relative sizes of the panes, move the mouse pointer to the dividing line, and when you see the split pointer, click and drag the dividing line to a new position.
3 answers
Mouse click means to actually push the button on the mouse while in a position. Mouse over just means the cursor is over the area. Mouse over a link on WikiAnswers and you will get a hand rather than an arrow.
1 answer
Swish and Flick! It's on the table next to the cauldron, click and just drag it up with your mouse.
1 answer
You can email any website to a friend. To do this, click your mouse in the search bar. Right click, then copy. Then in the body of your email simply put your mouse there in the empty space. Right click your mouse again, click paste. The link should be there for you now.
1 answer
you go to start and then go to Microsoft office the scrooll down to Microsoft office publisher and click it once or twice and click brochure when it loads and u should know what to do next
1 answer
Hover over the map, right click, click on copy, open up a word document, right click, and click on paste.
1 answer
