0
Horizontal cabling is the cabling that connects the work area telecommunications room to the horizontal cross connect.
2 answers
Vertical Cabling - Runs between floor to floor. It is used for Core to Distribution (or Access) switch connectivity. Usually consists of fiber cables
Horizontal Cabling - Runs on one floor. Runs from Distribution or Access switches to the end user. Usually copper.
1 answer
90 meters
1 answer
None of the above
1 answer
90 Meters+ 10 meters for running cables so 100 meters is the total.
1 answer
- Horizontal cabling
- Backbone cabling
- Work area
- Telecommunications rooms and enclosures
- Equipment rooms
- Entrance facility (building entrance)
1 answer
Fiber optic cabling, Category cabling, and coaxial cabling.
1 answer
RFC cabling stands for "Request for Comments" cabling. RFC is a series of documents published by the Internet Engineering Task Force (IETF) that define standards and protocols for the internet. In the context of cabling, RFC cabling refers to following the guidelines set out in these documents for the design and installation of network cabling systems.
1 answer
Backbone Cabling
1 answer
Yes, there are Many kinds of NICs capable of using multiple cabling
a 10/100 NIC is a NIC that can use both 10BaseT Cabling and 100Base Cabling
1 answer
The most popular cabling these days is Ethernet.
1 answer
There were hundreds of miles of electric cabling on Titanic.
1 answer
Investing in enhanced data cabling is a future-proof choice. As technology advances and bandwidth requirements increase, structured cabling systems from the structured cabling companies in Abu Dhabi are designed to accommodate higher data rates.
1 answer
· What sort of cabling is suitable for Fast Ethernet protocols?
1 answer
Ethernet networking typically uses category 5 or category 6 cabling.
1 answer
A cabling element that does not commonly occur in coaxial cables is cladding.
1 answer
A cabling element that does not commonly occur in coaxial cables is cladding.
1 answer
Advantages to good cabling include extra security, quicker service and less expense. Good cabling can also take up less space and have lower electrical interference.
1 answer
Which two places are most appropriate to use UTP cabling?
1 answer
coaxial cable
1 answer
One can find a data cabling installer in New Orleans by using Yellow Pages or Yelp. Their websites have many listings for data cabling installers and customer reviews of each.
1 answer
In computer networking, the type of cabling that is easiest to install is coaxial cable. It is a light, inexpensive and flexible cable.
1 answer
Category 5. This is used to specify a quality of network cabling. Category 5 is the lowest category that is usable for network cabling.
1 answer
A hub uses straight throught cabling from clients to the hub, and uses a cross-over cable with the up-link ports to connect hubs to hubs.
Usually, the cabling is UTP (Unshielded Twisted Pair) wiring.
1 answer
Structured cabling is building or campus telecommunications cabling infrastructure that consists of a number of standardized smaller elements (hence structured) called subsystems.
Structured cabling design and installation is governed by a set of standards that specify wiring data centers, offices, and apartment buildings for data or voice communications using various kinds of cable, most commonly category 5e (CAT5e), category 6 (CAT6), and fiber optic cabling and modular connectors.
1 answer
The thickness of the different types of cabling and components will determine how fast or slow the test will be.
1 answer
it is not UPT ,it is UTP which stands Unshielded Twisted Pair. The UTP is mainly used for network cabling i.e; LAN cabling.
1 answer
There are different types of gibabit Ethernet; the cabling can either be some kind of copper cable, usually UTP, or fiber optic.
1 answer
The Paladin 1117 GripP 20 Stripper comes highly recommended for stripping CAT5 cabling.
1 answer
Talk to your electrician or home security installer about what you want the system to do and ask, what type of cabling do you need to make it happen.
1 answer
Connect each device to a centralized LAN switch using UTP cabling
1 answer
That question is very vague. It could refer to varieties of power, telephone and computer network cabling. If you are referring to computer networking this is usually called UTP (unshielded twisted pair) cabling.
1 answer
im going to assume your talking about computer networking which in this case would be RISER. In ceiling would be plenum
1 answer
Structured cabling is used for telecommunications withing a building or campus. The reason it is called structured is because it is made up of many different subsystems.
1 answer
A horizontal line.
A horizontal line.
A horizontal line.
A horizontal line.
2 answers
Patch panels are not required for cabling a network. They fulfill the function of centralizing connections in an area, and allow for easy movement of workstations from network to network. In a wiring closet you may find many different connections that have to be connected from a router to the workstations on the floor.
With a patch panel you can connect multiple systems from a wiring closet using horizontal wiring to the work areas very easily. This makes it easier to create wired networks but it is not absolutely required.
1 answer
