answersLogoWhite

0

Search results

Transformers are inherently bidirectional.

1 answer


Relays are bidirectional devices.

1 answer


Data flow is always bidirectional my friend, don't confuse.

1 answer


Port 0 is called true bidirectional port..............

swapneel

1 answer


Still have questions?
magnify glass
imp

Bidirectional Reflectance Distribution Function

1 answer



Yes. The direction does not matter.

1 answer


Its not, a diode is unidirectional.

1 answer



In electronics, bidirectional device is device which can be used by both directions like resistor. It does not effect on characteristics of device if we change the terminals of that device.

1 answer


A data should be either WRITTEN to a memory or should be READ from a memory (both direction)and so the data bus is bidirectional.

1 answer


A DS3 can do 45Mbps Bidirectional Simultaneously.

1 answer



3D sound is omnidirectional

1 answer


a bidirectional light-sensitive avalanche diode

1 answer


How do I turn enable bidirectional support on in the Canon MG2100 series properties dialg box

1 answer


yes it is, but it's not the greatest!

1 answer


It is a bidirectional power flow converter

1 answer



It can be. It depends on the structure and how it is implemented.

1 answer



A unidirectional amplifier & a Bidirectional amplifier

1 answer


No. A resistor's electrical characteristics are bidirectional.

1 answer


No. 3D soundcards are omni directional

1 answer


A DC pass through will pass a DC voltage in only one direction. Bidirectional will let a DC voltage travel both directions.

1 answer


Unidirectional TVS: A TVS device with asymmetrical

current versus voltage (I−V) properties. A unidirectional

TVS is best suited for protecting circuit nodes whose signals

are unidirectional or always above or below the reference

voltage, usually ground.

Bidirectional TVS: A TVS device with symmetrical I−V

properties. A bidirectional TVS is best suited for protecting

electrical nodes whose signals are bidirectional or can have

voltage levels both above and below the reference voltage,

usually ground

1 answer


A DS3 can do 45Mbps Bidirectional Simultaneously.

That is 5.63 MBps

1 answer




So that the processor can both read and write data.

1 answer


A bus in this context is a data route which can carry data in both directions.

1 answer





Hinde ko alm toh ako nga nagtatanong eh!!

1 answer


Advantage of Bi-directional Implementation

1. Bi directional implementation of association is useful for two way navigation between classes

2. Independent of Classes

2. Useful for existing predefined classes which are not modified.

1 answer


A data bus is bidirectional because the processor needs it to both read and write. Also, in the case of the 4004, the data bus was tri-multiplexed with the 12 bit address bus and the 8 bit opcode bus.

1 answer


This nothing but forward and reverse recording... nothing but bidirectional meters

1 answer


Because it can control input voltage in both halves of cycle.

1 answer


Diac is a bidirectional electronic switch that can pass current in either directions according to the polarity applied on it.

1 answer


Water is bidirectional process. It is cyclic in nature.

1 answer


Advantages of using bidirectional A search algorithm in pathfinding include faster search times and more efficient use of resources. Disadvantages may include increased complexity in implementation and potential for higher memory usage.

1 answer


Control Panel / Click on the Printer /

This will display a dialog box.

Select Menu Printer / Properties / Ports Tab/

Enable bidirectional support check box

2 answers


its because it only allows current to passy through one direction. They are like diodes

1 answer


The arc is the line that connects two nodes in a network. There are two kinds of arcs; unidirectional and bidirectional. Unidirectional means the flow is in one direction (if you are studying for example the water supply system in a city). Bidirectional means the flow is in both directions. Network models are very helpful to simplify real problems.

1 answer


I guess it means that in your system, you can make the input output and vice versa. Example, if you have power conditioning unit (PCU) that either operates as rectifier or inverter. That means your PCU has bidirectional power flow. you can then operate it on the mode you need; rectification or inversiion mode.

I hope that was helpfull

Naeem, Mohammad

1 answer


Don't really know what you're asking for here, as that's not a generally acknowledged name. There are freecoaster hubs, which are recognized by that they can be rolled backwards w/o the pedals moving along.

2 answers


The control bus is a unidirectional bus because it can receive the data from any kind of inputs and send back the output. This whole process is done by the data buses.

4 answers


The optical fiber can be used both as unidirectional and bidirectional. The main application of optical fiber is in long-distance links, so there exists no need to employ them as unidirectional. For each direction different wavelengths are used to modulat the signals. At the same time many bidirectional signals can travel through the same optical fiber.

1 answer


scr is a silicon control rectifier used to control the rectifing voltage.. its a bidirectional device can use it for both the directions......

1 answer